• Non ci sono risultati.

181Appendix II T [°C] A [Pa·s

N/A
N/A
Protected

Academic year: 2021

Condividi "181Appendix II T [°C] A [Pa·s"

Copied!
2
0
0

Testo completo

(1)

181 Appendix II T [°C] A [Pa·s1/z] z [-] k [Pa·sn] n [-] 4 39±3 4.70±0.04 5.7±0.2 0.39±0.01 0 47±2 4.87±0.04 7.1±0.3 0.39±0.01 -5 56±3 5.1±0.1 8.2±0.4 0.38±0.01 Table 1 - Weak gel model parameters (A and z) and viscosity power law (k and n) for sample E2 at different temperatures

T [°C] A [Pa·s1/z] z [-] k [Pa·sn] n [-] 4 66.4±0.6 5.53±0.08 9.3±0.3 0.36±0.01 0 70±2 5.34±0.06 10.6±0.4 0.36±0.01 -5 82±2 5.30±0.09 12.4±0.5 0.37±0.01 Table 2 - Weak gel model parameters (A and z) and viscosity power law (k and n) for sample E3 at different temperatures

T [°C] A [Pa·s1/z] z [-] k [Pa·sn] n [-] 4 149±2 7.83±0.06 17.6±0.4 0.19±0.01 0 173±5 8.0±0.2 21.1±0.4 0.208±0.009 -5 181±5 7.9±0.3 25.3±0.2 0.156±0.005 Table 3 - Weak gel model parameters (A and z) and viscosity power law (k and n) for sample E4 at different temperatures

Table 4 - Weak gel model parameters (A and z) and viscosity power law (k and n) for sample E5 at different temperatures T [°C] A [Pa·s1/z] z [-] k [Pa·sn] n [-] 4 13.3±0.2 3.3±0.1 1.72±0.06 0.540±0.009 T [°C] A [Pa·s1/z] z [-] k [Pa·sn] n [-] 4 23±1 4.1±0.1 2.3±0.1 0.46±0.01 0 22.9±0.9 4.0±0.1 2.8±0.2 0.45±0.02 -5 25.8±0.7 4.49±0.06 3.3±0.2 0.47±0.01

(2)

182 0 17.6±0.1 3.58±0.06 2.18±0.09 0.52±0.01 -5 16.5±0.3 3.2±0.1 2.6±0.1 0.53±0.01 Table 5 - Weak gel model parameters (A and z) and viscosity power law (k and n) for sample E6 at different temperatures

Table 6 - Weak gel model parameters (A and z) and viscosity power law (k and n) for sample E7 at different temperatures

T [°C] A [Pa·s1/z] z [-] k [Pa·sn] n [-] 4 10.76±0.48 3.51±0.16 3.02±0.04 0.45±0.004 0 11.16±0.27 3.43±0.09 3.91±0.04 0.42±0.004 -5 13.34±0.30 3.39±0.10 4.34±0.07 0.44±0.005

Figura

Table 4 - Weak gel model parameters (A and z) and viscosity power law (k and n) for sample  E5 at different temperatures   T [°C]  A [Pa·s 1/z ]  z [-]  k [Pa·s n ] n  [-]  4 13.3±0.2  3.3±0.1  1.72±0.06  0.540±0.009 T [°C] A [Pa·s1/z] z [-] k [Pa·sn] n [-
Table 6 - Weak gel model parameters (A and z) and viscosity power law (k and n) for sample  E7 at different temperatures

Riferimenti

Documenti correlati

In figura 6.7 sono illustrati gli spettri di assorbimento del Wax_B ricavati dopo aver sottoposto il bitume ad invecchiamento alla temperatura di 163°C e alla T work.

Il Data Flow Diagram della Figura 2.5 evidenzia i dati scambiati tra gli applicativi «Concerto», «E», «ActiveInfo», «XLCubed» e Portale web della Casa Mandante.. Figura 2.5: Data

attraverso il primo studio, che utilizza uno scambiatore a piastre ondulate, si è notato che aumentando la pressione del componente il flusso di assorbimento di massa

[r]

whilst the boundary condition of the force is assumed to be time dependent (Bird et al., 1977). According to the fact that a cereal paste subjected to a stationary shear flow often

To account for the foam density change during extrusion through the nozzle, owing to the gas expansion, the single bubble growth was analysed by a “local” momentum balance at

Experimental results, in terms of residual mass as time function, are compared in figure 9.2 with simulated data, even though only a few points can be obtained during the

Rheological Study of Aerated Systems “Studio Reologico di Sistemi Aerati”. Settore Scientifico-Disciplinare IND-ING / 24 – Principi di