Bibliografia
Testi relativi alle macchine termiche in generale
Gary L. Borman, Kenneth W. Ragland Combustion Engineering
McGraw- Hill International Editions,1998
Gianmario Mozzi
Lezioni di macchine 1 e 2 Tipografia editrice pisana,1994
Gianmario Mozzi
Termodinamica applicata alle macchine Tipografia editrice pisana,1993
Testi relativi ai motori a combustione interna
C. F. Taylor
The Internal Combustion Engine in Theory and Practice (vol. 1,2) M.I.T. Press, 1985
A. Beccari, C. Caputo Motori termici volumetrici UTET 1987
J.B. Heywood
Internal Combustion Engine Fundamentals McGraw-Hill International Editions,1988
Roberto Gentili
Dispensa del corso di motori termici per trazione
Giancarlo Ferrari
Motori a combustione interna Edizioni il Capitello, 1992
G. Bocchi.
Motori a quattro tempi UTET 1987
Roberto Della Volpe M. Migliaccio
Motori a combustione interna per autotrazione Liguori, Napoli
Giacomo Augusto Pignone, Ugo Romolo Vercelli Motori ad alta potenza specifica
Giorgio Nada editore,1995
Testi specifici relativi ai motori GDI
Fuquan Zhao, David L. Harrington, Ming-Chia Lai Automotive gasoline direct-injection engines
Yong-Jin Kim, Sang H. Lee, Nam-Hyo Cho
Effect of air motion on fuel spray charateristics in a gasoline direct injection engine
G.K. Fraidl, W.F. Piock, M. Wirth
Gasoline direct injection: the next step towards high performance engines?
Chul Ho Yu, Seok Hong Noh , and Jae Kwon Choi
A Research on Fuel Spray and Air Flow Fields for Spark-Ignited Direct Injection using Laser Measurement Technology
Shoji Adachi, Kimihide Horio,Yoshikatsu Nakamura, Akihito Tanke Development of Toyota 1ZZ-FE Engine
Siemens VDO Automotive
Gasoline direct Injection Systems for High Performance Engines
R. Gentili, S. Zanforlin, P. Dell’Orto
Stratified charge GDI two-stroke engine solutions for stable fuel confinement
Gianpaolo Riva
Autotecnica: Iniezione diretta di benzina Mitsubishi
Flavio Frigerio
Autotecnica: Dal gruppo PSA arriva il nuovo motore Hpi
Gianpaolo Riva
Autotecnica: Iniezione diretta di benzina secondo Renault
Dr. Rainer Wurms, Dr. Michael Grigo, Wolfgang Hatz (Audi AG Ingolstadt) Audi FSI Technology Improved Performance and Reduced Fuel Consumption
Tesi di laurea di Ettore Musu
Motore quattro tempi A.C. con iniezione diretta “spray-guided”: studio CFD di camera di combustione idonea alla stratificazione della carica
Testi relativi agli iniettori
Lefebvre.A.H.,
Atomization and Sprays
Hemisphere Publishing Corporation, 1989
Doumas M., Laster R.
Liquid-Film Properties for Centrifugal Spray Nozzles Chem. Eng. Prog., pp 518-526, 1953
Yule A.J., Chinn J.J.
Swirl Atomizer Flow : Classical Theory Revisited ICLASS’94, Rouen, paper III-1, 1994
Ren W.M., Shen J., Nally S.
Geometrical Effects on Flow Characteristics of Gasoline High Pressure Direct Injector SAE Technical paper, No 971641, 1997
Cousin J., Ren W.M., Nally S.
Transient Flows inHigh Pressure Swirl Injectors SAE Technical paper, No 980499, 1998
Arcoumanis C., Gavaises M., Argueyrolles B., Galzin F.
Modeling of Pressure Swirl Atomizers for GDI Engines SAE Technical paper No 1999-01-0500, 1999
Arcoumanis C., Gavaises M.
Pressure Swirl Atomizers for DISI Engines : Further Modeling and Experiments SAE Technical paper No 2000-01-1044, 2000
Muschelknautz E., Krambrock W.
Chem. Ing. Tech. 42, No 5, pp 241-255, 1970
Dumouchel C., Ledoux M.
Atomization of Flat and Annular Sheets. Practical Use of Linear Theory ICLASS’91, Gaithersburg, USA, paper 12, 1991
Cousin J., Dumouchel C.
Effect of Viscosity on the Linear Instability of a Flat Liquid Sheet Atomization and Sprays Vol. 6,no 5, 1996
Dombrowski N., Hooper P.C.,
The Effect of Ambient Density on Drop Formation in Sprays Chem. Eng Scie, Vol 13, 291-305, 1962
Dombrowski N., Hasson D.
AICHE Journ., Vol. 15, no 4, p 604 1969
Cousin J., Nuglisch H.J.,
Prediction of Characteristics of Sprays Produced by High Pressure Swirl Injectors Toulouse, ILASS Europe’99, 1999
Testi relativi alla CFD
Versteeg H K, Malalasekera W
Introduction To Computational Fluid Dynamics. The Finite Volume Method Longman, 1995
John F. Wendt
Computational Fluid Dynamics Springer,1996
Gordon P. Blair
Design and simulation of four stroke engines
Manuali operativi
ICEM CFD engineering
Direct CAD Interfaces Tutorial Manual
ICEM CFD engineering Meshing Tutorial Manual
OpenFOAM Programmer’s Guide
OpenFOAM User’s Guide
Manuale AVL Fire
