Bibliografia
[1] Bernardini F., Rushmeier H., Martin I.M., Mittleman J., Taubin G., Building a
digital model of Michelangelo's Florentine Pietà, IBM T.J. Watson Research
Center, P.O. Box 704, Yorktown Heights, NY 10598.
[2] Levoy M., Pulli K., Curless B., Rusinkiewicz S., Koller D., Pereira L., Ginzton M., Anderson S., Davis J., Ginsberg J., Shade J., Fulk D., The digital
Michelangelo project: 3d scanning of large statues, Comp. Graph. Proc., Annual
Conf. Series (Siggraph 2000), ACM Siggraph Addison Wesley, July 2000.
[3] Montgomery D.C., Design and Analysis of Experiments, 3rd ed., New York, John Wiley & Sons (1991).
[4] Horn E., Kiryati N., Toward optimal structured light patterns, Department of Electrical engineering, Technion-Israel Institute of Tecnology, Haifa 32000, Israel.
[5] Meccheri N., Sviluppo Di Un Sistema Ottico Per La Rilevazione Di Superfici
Estese, Tesi di Laurea in Ingegneria Meccanica presso la Facoltà di Ingegneria
dell’Università degli Studi di Pisa, 2003.
[6] Costanzo S., Sviluppo di un sistema di visione Gray-Code per applicazioni di
Reverse Engineering, Tesi di Laurea in Ingegneria Meccanica presso la Facoltà
di Ingegneria dell’Università degli Studi di Pisa, 2002.
[7] Berthold K.P. Horn, Tsai’s camera calibration method revisited, Copyright 2002.
[8] Montgomery D.C., Design and Analysis of Experiments, 3rd ed., New York, John Wiley & Sons (1991).
[9] Lorenzen T.J., Anderson V.L., Design of Experiments – A No Name
Approach, Statistic: textbook and monograph vol.139.
[10] Sansoni G., Patrioli A., Non contact 3D sensing of free-form complex
surfaces, Videometrics and Optical Methods for 3D Shape Measurement, Sabry
F. El-Hakim, Armin Gruen, Editors, Proceedings of SPIE, Vol.4309 (2001), SPIE.
BIBLIOGRAFIA
[11] Guhring J., Brenner C., Bohm J., Fritsch D., Data processing and
calibration of a cross-pattern stripe projector, IAPRS, Vol.33, Amsterdam, 2000.
[12] Guhring J., Dense 3D surface acquisition by structured light using
off-the-shelf components, Institute for Photogrammetry, University of Stuttgart,
Germany.
[13] Bouguet J.Y., Perona P., Method for recovering 3D surface shape based
on grayscale structured lighting, California Institute of Tecnology 136-93
Pasadena, CA 91125.
[14] Caspi D., Kiryati N., Shamir J., Range Imaging With Adaptive Color
Structured Ligh, IEEE transactions on pattern analysis and machine
intelligence, col. 20, no. 5, may 1998.
[15] Roth G., Registering two overlapping range images, Proceedings of the Second International Conference on Recent Advances in 3D Digital Imaging and Modeling (3DIM'99), Ottawa On. October 1999, NRC 43637.
[16] Fangi G., Photogrammetry notes, Università degli Studi di Ancona.
[17] Fraser C.S., Some thoughts on the emergence of digital close range
photogrammetry, Photogrammetric Record, April 1998.
[18] Fraser C., Automated vision metrology: a mature technology for industrial
inspection and engineering surveys, 6th South East Asian Surveyors Congress,
Fremantle, Western Australia, November 1999.
[19] Reimar K. Lenz and Roger Y. Tsai, Tecniques for Calibration of the Scale
Factor and Image Center for High Accuracy 3-D Machine Vision Metrology,
Copyright 1988 IEEE.
[20] Bosemann W., Photogrammetric solutions for industrial automation and
process control, Photogrammetric Record, October 1998.
[21] Gayde J.C., Humbertclaude C., Lasseur C., Prospects of Close Range
Digital Photogrammetry in large physics installations, C.E.R.N., Geneva,
Switzerland.
[22] R.J Valkenburg, A.M. McIvor, Accurate 3D measurement using a Structured
BIBLIOGRAFIA
[23] Shortis M.R., Snow W.L., Videometric tracking of wind tunnel aerospace
models at Nasa Langley Research Center, Photogrammetric Record, April
1997.
[24] Van Voorden A., Photogrammetric quality control during the construction of
a submarine, Proceedings of SPIE - The International Society for Optical
Engineering, Vol.1395, 1990.
[25] Albertz J., Wiedemann A., Acquisition of CAD data from existing buildings
by photogrammetry, Technical University of Berlin, Berlin, Germany.
[26] Veldhuis H., Vosselman G., The 3D reconstruction of straight and curved
pipes using digital line photogrammetry, ISPRS, Journal of Photogrammetry
and Remote Sensing 53 (1998).
[27] Atkinson K.B., Close range photogrammetry and machine vision, Typeset by Whittles Publishing Services, Published by Whittles Publishing, Roseleigh House, Latheronwheel, Caithness, KW5 6DW, Scotland, UK, 2001.
[28] GOM Optical Measuring Techniques, Quality control and 3D digitizing using
photogrammetry and fringe projection.
[29] Bergmann D., Galanulis K., Winter D., Advanced 3d fringe projection
systems, GOM mbH, Braunschweig, 1997.
[30] Ganci G., Clement R., The use of self-identifying targeting for feature based
measurement, Coordinate Measuring System Committee, July 2000, Dearborn,
Michigan.
[31] Ganci G., Handley H., Automation in videogrammetry, Geodetic services, Inc. 1511 S. Riverview Drive, Melbourne, Florida, USA.
[32] Fusiello A., Visione artificiale: appunti delle lezioni, Dipartimento di informatica, Università di Verona, Giugno 2002.
[33] Bouguet J.Y., Perona P., Camera calibration from points and lines in dual
space geometry, Submitted to European Conference on Computer Vision,
1998.
[34] Matlab® Camera Calibration Toolbox. Intel Open Source Computer Vision Library.
BIBLIOGRAFIA
[35] Malservisi N., Sviluppo di metodi automatici per la creazione dei modelli
CAD partendo dai prototipi fisici di componenti di veicoli, Tesi di Laurea in
Ingegneria Meccanica presso la Facoltà di Ingegneria dell’Università degli Studi di Pisa, 2001.
[36] Toci E., Applicazione di tecniche di Reverse Engineering per la
ricostruzione di modelli CAD di prototipi fisici, Tesi di Laurea in Ingegneria
Meccanica presso la Facoltà di Ingegneria dell’Università degli Studi di Pisa, 2001.
[37] Rocchini C., Cignoni P., Montani C., Pingi P., Scopigno R., A low cost 3d
scanner based on structured light, Vol.20 (2001), No.3, Eurographics 2001.
[38] Rocchini C., 3D scanning a basso costo con luce strutturata, Visual Computing Group, ISTI-CNR, Pisa.
[39] Frankowski G., Chen M., Huth T., Real time 3D shape measurement with
digital stripe projection by Texas Instruments Micromirror Devices DMDTM, GFMesstechnik GmbH, Warthestr. 21, D-14513 Teltow/Berlin.
[40] Wolf H.G.E., Getting 3D shape by coded light approach in combination with
phaseshifting, ABW Automatisierung und Bildverarbeitung Dr. Wolf GmbH,
Gutenbergstrabe 9, D-72636 Frickenhausen.
[41] Trobina M., Error model of a coded-light range sensor, Communication Technology Laboratory, Image Science Group, ETH-Zentrum, CH-8092, Zurich, 21 September 1995.
[42] Bernardini F., Mittleman J., Rushmeier H., Silva C., Taubin G., The
Ball-Pivoting Algorithm for surface reconstruction, IEEE Transactions on
Visualization and Computer Graphics, Vol.5, No.4, 1999.
[43] Arun K.S., Huang T.S., Blostein S.D., Least-squares fitting of two 3D point
sets, IEEE Transactions on Pattern Analysis and Machine Intelligence, Vol.9,
No.5, September 1987.
[44] Rusinkiewicz S., Levoy M., Efficient variants of the ICP algorithm, Stanford University.
BIBLIOGRAFIA
[45] Zhang Z., Iterative point matching for registration of free-form curves, Unitè de Recherche INRIASophia Antipolis, Rapports de Recherche, No.1658, Programme 4, Robotique Image et Vision, Mars 1992.
[46] Besl P.J., McKay N.D., A method for registration of 3D shapes, IEEE Transactions on Pattern Analysis and Machine Intelligence, Vol.14, No.2, February 1992.
[47] Chen C.S., Hung Y.P., Cheng J.B., RANSAC-Based DARCES: a new
approach to fast automatic registration of partially overlapping range images,
IEEE Transactions on Pattern Analysis and Machine Intelligence, Vol.21, No.11, November 1999.
[48] Chetverikov D., Stepanov D., Robust Euclidean alignment of 3D point sets, Computer and Automation Research Institute, Budapest, Kende u.13-17, H-1111, Hungary.
[49] Kitajima K,. Maki H., A method of generating both an open shell and a solid
model utilizing stereo-visual mage pairs from multiple views of 3D objects,
Systems and Computers in Japan, Vol.24, No.10, 1993.
[50] de Fàtima Santos Farias M., da Carvalho J.M., Multi-view technique for 3D
polyhedral object recognition using surface representation, Revista Controle &
Automaçao, Vol.10, No.2, Maio Jun. Jul. e Agosto 1999.
[51] Karbacher S., Hausler G., Schonfeld H., Reverse engineering using optical
range sensors, Handbook of Computer Vision and Applications, Vol.3: Systems
and Applications, Copyright.1999 by Academic Press.
[52] Hall-Holt O., Rusinkiewicz S., Stripe Boundary Codes for Real-Time
Structured-Light Range Scanning of Moving Objects, Stanford University
Stanford, CA 94305.
[53] Scopigno R., 3D scanning technology, ACM SolidModeling'01, CNUCE-CNR, Pisa.
[54] Fondamenti di rilievo 3D (3D scanning), Active 3D Sensing, Copyright.1997-2000, National Research Council of Canada.