140
Bibliografia
Anastasi. Trattato di anatomia umana. (Edi Ermes). 2009.
Corradi Dell’acqua. Meccanica delle strutture. Le teorie strutturali e il metodo degli elementi finiti.
(McGraw-Hill Libri Italia srl)
Feodosev. Resistenza dei materiali. (Editori Riuniti)
Marchetti N. Lezioni di traumatologia dell'apparato locomotore. (Vallerini editrice).
Redaelli. Biomeccanica. Analisi multiscala di tessuti biologici. (Patron Editore). 2007
Bayraktar, H. H., Morgan, E. F., Niebur, G. L., Morris, G. E., Wong, E. K., & Keaveny, T. M.
(2004). Comparison of the elastic and yield properties of human femoral trabecular and cortical bone tissue. Journal of Biomechanics, 37(1), 27-35. doi:10.1016/S0021-
9290(03)00257-4
Bergmann, G., Deuretzbacher, G., Heller, M., Graichen, F., Rohlmann, a, Strauss, J., & Duda, G. N.
(2001). Hip contact forces and gait patterns from routine activities. Journal of biomechanics, 34(7), 859-71. Retrieved from http://www.ncbi.nlm.nih.gov/pubmed/11410170
Cristofolini, L, Juszczyk, M., Taddei, F., & Viceconti, M. (2009). Strain distribution in the proximal human femoral metaphysis. Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine, 223(3), 273-88. Retrieved from
http://www.ncbi.nlm.nih.gov/pubmed/19405434
Cristofolini, Luca, Juszczyk, M., Martelli, S., Taddei, F., & Viceconti, M. (2007). In vitro
replication of spontaneous fractures of the proximal human femur. Journal of biomechanics, 40(13), 2837-45. doi:10.1016/j.jbiomech.2007.03.015
Grassi, L., Schileo, E., Taddei, F., Zani, L., Juszczyk, M., Cristofolini, L., & Viceconti, M. (2011).
Accuracy of finite element predictions in sideways load configurations for the proximal human femur. Journal of biomechanics, 1-6. Elsevier. doi:10.1016/j.jbiomech.2011.10.019
Helgason, B., Perilli, E., Schileo, E., Taddei, F., Brynjólfsson, S., & Viceconti, M. (2008).
Mathematical relationships between bone density and mechanical properties: a literature review. Clinical biomechanics (Bristol, Avon), 23(2), 135-46.
doi:10.1016/j.clinbiomech.2007.08.024
Kalender, W. a, Felsenberg, D., Genant, H. K., Fischer, M., Dequeker, J., & Reeve, J. (1995). The European Spine Phantom--a tool for standardization and quality control in spinal bone mineral measurements by DXA and QCT. European journal of radiology, 20(2), 83-92. Retrieved from http://www.ncbi.nlm.nih.gov/pubmed/7588873
141
Kalender, W. A. (1992). A phantom for standarization and quality control in spinal bone mineral measurements by QCT and DXA: Design considerations and specifications.
Malandrino, A., Taddei, F., Schileo, E., Juszczyk, M., Cristofolini, L., & Viceconti, M. (2008).
PREDICTION OF FAILURE LOAD AND LOCATION ON PROXIMAL FEMUR UNDER A SINGLE STANCE LOADING CONDITION. Journal of Biomechanics, 41(July), 2989- 2989.
Morgan, E. (2003). Trabecular bone modulus–density relationships depend on anatomic site.
Journal of Biomechanics, 36(7), 897-904. doi:10.1016/S0021-9290(03)00071-X
Schileo, E., Dall’ara, E., Taddei, F., Malandrino, A., Schotkamp, T., Baleani, M., & Viceconti, M.
(2008). An accurate estimation of bone density improves the accuracy of subject-specific finite element models. Journal of biomechanics, 41(11), 2483-91.
doi:10.1016/j.jbiomech.2008.05.017
Schileo, E., Taddei, F., Cristofolini, L., & Viceconti, M. (2008). Subject-specific finite element models implementing a maximum principal strain criterion are able to estimate failure risk and fracture location on human femurs tested in vitro. Journal of biomechanics, 41(2), 356-67.
doi:10.1016/j.jbiomech.2007.09.009
Schileo, E., Taddei, F., Malandrino, A., Cristofolini, L., & Viceconti, M. (2007). Subject-specific finite element models can accurately predict strain levels in long bones. Journal of
biomechanics, 40(13), 2982-9. doi:10.1016/j.jbiomech.2007.02.010
Taddei, F. (2004). An improved method for the automatic mapping of computed tomography numbers onto finite element models. Medical Engineering & Physics, 26(1), 61-69.
doi:10.1016/S1350-4533(03)00138-3
Taddei, Fulvia, Cristofolini, L., Martelli, S., Gill, H. S., & Viceconti, M. (2006). Subject-specific finite element models of long bones: An in vitro evaluation of the overall accuracy. Journal of biomechanics, 39(13), 2457-67. doi:10.1016/j.jbiomech.2005.07.018
Taddei, Fulvia, Schileo, E., Helgason, B., Cristofolini, L., & Viceconti, M. (2007). The material mapping strategy influences the accuracy of CT-based finite element models of bones: an evaluation against experimental measurements. Medical engineering & physics, 29(9), 973-9.
doi:10.1016/j.medengphy.2006.10.014
Viceconti, Marco, Olsen, S., Nolte, L.-P., & Burton, K. (2005). Extracting clinically relevant data from finite element simulations. Clinical biomechanics (Bristol, Avon), 20(5), 451-4.
doi:10.1016/j.clinbiomech.2005.01.010
Zannoni, C., Mantovani, R., & Viceconti, M. (1998). Material properties assignment to finite element models of bone structures: a new method. Medical engineering & physics, 20(10), 735-40. Retrieved from http://www.ncbi.nlm.nih.gov/pubmed/10223642