• Non ci sono risultati.

American Society for Testing and Materials, Philadelphia, (1944); pp.118-134.

N/A
N/A
Protected

Academic year: 2021

Condividi "American Society for Testing and Materials, Philadelphia, (1944); pp.118-134."

Copied!
4
0
0

Testo completo

(1)

Bibliography

[1] Findley W.N. - “Creep characteristics of plastics” - Proc. Symposium on Plastics.

American Society for Testing and Materials, Philadelphia, (1944); pp.118-134.

[2] Findley W.N. & Lai J.S.Y. - “A modified superposition principle applied to creep of nonlinear viscoelastic material under abrupt change in state of combines stress” - Transactions of the Society Rheology, 11(3) (1967); pp.361-380.

[3] Hiel C., Cardon A.H. & Brison H.F. - “The nonlinear viscoelastic response of resin matrix composite laminates” - NASA Contractor Report 3772, (1984).

[4] Findley W.N. & Ghosla G. - “An equation for tension creep of the three unfilled thermoplastics” - J. Soc. Plas. Eng., 12(12) (1956); pp.20-25.

[5] Yen Shing-Chung & Williamson F.L. - “Accelerated characterization of creep response of an off-axis composite material” - Composite Science and Technology 38 (1990); pp.103-118.

[6] Janas V.F. & McCullough R.L. - “The effects of physical aging on the viscoelastic behavior of thermoset polyester” - Composites Science and Technology 30 (1987);

pp.99-118.

[7] Hosaki K., Nakada M. & Miyano Y. - “Effect of physical aging on time- temperature superposition principle for viscoelastic behavior of thermoset- ting resins” - Materials System Research Laboratory, Kanazawa Institute of Technol- ogy (2012).

[8] Muliana et al. - “Characterization of thermo-mechanical and long-term behav- iors of multi-layered composite materials” - Composites Science and Technology 66 (2006); pp.2907-2924.

[9] Schapery R.A. - “On the characterization of nonlinear viscoelastic materials”

- Polym. Eng. Sci., 9(4) (1969); pp.295-310.

[10] Muliana A. & Khan K.A. - “A time-integration algorithm for thermo- rheologically complex polymers” - Computational Materials Science 41 (2008);

pp.576–588.

[11] Leaderman H. - “Elastic and creep properties of filamentous materials and other high polymers” - Washington: The Textile Foundation (1943).

[12] Griffith W.I., Morris D.H. & Brinson H.F. - “The accelerated characterization of viscoelastic composite materials” - VPI & VSU Report, VPI-E-80-5, (1980).

164

(2)

[13] Dillard D.A., Morris D.H. & Brinson H.F. - “Creep and creep rupture of laminated graphite-epoxy composites” - VPI & VSU Report, VPI-E-81-3, (1981).

[14] Ma C.C.M., Tai N.H., Wu S.H., Lin S.H., Wu J.F. & Lin J.M. - “Creep behavior of carbon-fiber-reinforced polyetheretherketone (PEEK) laminated compos- ites” - Composites Part B 28B (1997); pp.407-417.

[15] Nishizaki I. & Sasaki I. - “Durability of pultruded GFRP exposed under static load” - International Institute for FRP in Construction for Asia-Pacific Region.

[16] Mario F. Sa, Augusto M. Gomes, Joao R. Correja & Nuno Silvestre - “Creep behavior of pultruded GFRP elements” - Composite Structures 93 (2011); pp.2450-2459 and pp.2409-2418.

[17] Andersons J., Joffe R., Hojo M. & Ochiai S. - “Glass fiber strength distribution determined by common experimental methods” - Composite Science and Tech- nology 62 (2002); pp.131-145.

[18] Weibull W. - “A statistical theory of the strength of materials” - Handlingar, Royal Swedish Acad Energy Sci (1939); 151.

[19] Foray G., R’Mili M. & Descamps-mandine A. - “Analyse comparative de la distri- bution en taille des défauts sur fiber de verre par AFM et traction sur fil”

- Comptes Rendus des JNC 17 - Poitiers (2011).

[20] Paramonov Yu. & Andersons J. - “A family of weakest link models for fiber strength distribution” - Composites: Part A 38 (2007); pp.1227-1233.

[21] Watson A.S. & Smith R.L. - “An examination of statistical theories for fibrous materials in the light of experimental data” - Journal Materials Sciences, 20 (1985); pp.3260-3270.

[22] Tsai S.W. - “Structural behavior of composite material” - NASA CR-71, July 1964.

[23] Todinov M.T. - “Is Weibull distribution the correct model for predicting prob- ability of failure initiated by non-interacting flaws?” - International Journal of Solids and Structures 46 (2009); pp.887-901.

[24] Zinck P., Pays M.F., Rezakhanlou R. & Gerard J.F. - “Mechanical characterization of glass fibers as an indirect analysis of the effect of surface treatment” - Journal of Materials Science 34 (1999); pp.2121-2133.

[25] Zinck P., Pays M.F., Rezakhanlou R. & Gerard J.F. - “Extrapolation techniques at short gauge lengths based on the weakest link concept for fibers exhibiting multiple failure modes” - Philosophical Magazine A, Vol. 79, No. 9, (1999); pp.2103- 2122.

[26] Crawford R.J. - “Plastics engineering” - Third edition, Butterworth-Heinemann, (1998).

[27] Lemaitre J, Chaboche J-L., Benallal A. & Desmorat R. - “Mécanique des matériaux solides” - Trosième édition, Dunod, (2009).

165

(3)

[28] Tsai S.W. - “Strength theories of filamentary structures” - Fundamental aspects of fiber reinforced plastic composites, Conference Proceeding (1966).

[29] Hill R. - “The mathematical theory of plasticity” - Oxford University Press, London, (1950); p.318.

[30] Hoffmann O. - “The brittle strength of orthotropic materials” - Journal Com- posite Materials, April 1967; pp.200-206.

[31] Jones R.M. - “Mechanics of composite materials” - Second edition, Taylor &

Francic, Inc., (1999).

[32] CUR96 Guidelines FRP Composite Structures, 26th April 2012, RWS- Westraven Building, Utrecht, the Netherlands. IABSE-WC8 FRP Composite structures

& CUR.

[33] National Research Council of Italy - CNR-DT 205/2007, “Guide for the Design and Construction of Structures made of FRP Pultruded Elements”.

[34] Clarke J.L. - “EUROCOMP Design Code and Handbook” - The European Struc- tural Polymeric Composites Group, E & FN SPON (2005).

[35] Bank L.C. - “Composites for Construction: Structural design with FRP ma- terials” - John Wiley & Sons, Inc. (2006).

[36] Scott D.W. & Zureick A-H. - “Compression creep of a pultruded E-glass/vinyl- ester composite” - Composite Science and Technology 58(8) (1998); pp.1361-1369.

[37] Kotelnikova Natalia - “Optimisation mecanique et energetique d’enveloppes en materiaux composites pour les batiments” - Thése de doctorat en Structures et Matériaux, Ecole doctorale Sciences, Ingénierie et Environnement, Ecole des Ponts- ParisTech, Université Paris-Est (2012).

[38] Beyerlein I.J., Phoenix S.L. & Rishi Raj - “Time evolution of stress redistribution around multiple fiber breaks in a composite with viscous and viscoelastic matrices” - International Journal of Solids and Structures, 35 (1998); pp.3177-3211.

[39] European Standard EN ISO 14125:1998 - “Fiber-reinforced plastic composite - Determination of flexural properties”.

[40] Moromizato T., Nakada M. & Miyano Y. - “Applicability of time-temperature su- perposition principle to the mode I interlaminar fracture behavior of CFRP laminates” - European Conference on Composite Materials, Venice, Italy, 24-28 June 2012.

[41] Miyano Y., Nakada M. & Cai H. - “Formulation of long-term creep and fatigue strengths of polymer composites based on accelerated testing methodology”

- Journal of Composite Materials 42 (2008); p.1897.

[42] Miyano Y., Nakada M. & Noda J. - “Formulation of time-temperature dependent long-term fatigue strength of CFRP laminates” - 16

T H

International Conference on Composite Materials.

[43] Christensen R.M. - “Stress based yield/failure criteria for fiber composites” - International Journal Solids and Structures 34(5) (1997); pp.529-543.

166

(4)

[44] Gamstedt E.K., Berglund L.A. & Peijs T. - “Influence of interfacial strength on micro- and macroscopic fatigue behavior of longitudinal glass fiber rein- forced polypropylene” - Progress in durability analysis of composite systems. Rot- terdam; Balkema (1998); pp.137-142.

[45] Monkman F.C. & Grant N.J. - “An empirical relationship between rupture life and minimum creep rate in creep-rupture tests” - ASTM Special Technical Pubblication No.56, Philadelphia, (1956); pp.593-620.

[46] Bank L.C. & Mosallam A.S. - “Creep and failure of a full-size fiber-reinforced plastic pultruded frame” - Composite Engineering, Vol. 2, No. 3, (1992); pp. pp.213- 227.

[47] Findley W.N. - “Mechanism and mechanics of creep of plastics” - SPE Journal 16, (1960); pp.57-65.

[48] Greszczuk L.B. - “Microbuckling failure of circular fiber-reinforced compos- ites” - AIAA Journal, October 1975; pp.1311-1318.

[49] Dow N.F. & Rosen B.W. - “Evaluation of filament-reinforced composites for aerospace structural applications” - NASA CR-207, April 1965.

[50] Lager J.R. & June R.R. - “Compressive strength of boron-epoxy composites” - Journal of Composites Materials, January 1969; pp.48-56.

[51] Lankford J. - “Compressive failure of fiber-reinforced composites: buckling, kinking, and the role of the interphase” - Journal of Materials Science, 30 (1995);

pp.4343-4348.

[52] Madhukar M.S. & Drzal L.T. - Journal of Composite Materials, 26 (1992); p.310.

[53] Jelf P.M. & Fleck N.A. - Journal of Composite Materials, 26 (1992); p.2706.

[54] Perreux D. & Suri C. - “A study of the coupling between the phenomena of water absorption and damage in glass/epoxy composite pipes” - Composite Science and Technology, 57 (1997); pp.1403-1413.

[55] Nasir V., Dootejtema A., Torabigoudarzi H. & Niknami A. - “Effect of matrix type on corrosion mechanism of GFRP composite in acidic environment”

- ECCM15 - 15

T H

European Conference on Composite Materials, Venice, Italy, 24-28 June 2012.

[56] Davis R.O. & Selvadurai A.P.S. - “Plasticity and Geomechanics” - Cambridge University Press, (2002).

[57] Strogatz S.H. - “Nonlinear Dynamics and Chaos” - Perseus Books Publishing, (1994).

[58] Nedjar B. - “A time dependent model for unidirectional fibre-reinforced com- posites with viscoelastic matrices” - International Journal Solids and Structures 48 (2011); pp.2333-2339.

167

Riferimenti

Documenti correlati

Nello specifico, la mia domanda di ricerca è la seguente: “Nei pazienti adulti borderline con sintomo di autolesionismo è più efficace, per quanto riguarda il controllo

loro diritti fondamentali, oltre che una negazione esplicita delle conquiste culturali e sociali che dalla fine degli anni ‘60 nel mondo occidentale le donne

This device was used to test a cruciform specimen of very low carbon steel (SPECEN) and, then, to compare the results obtained with other existing yield criteria as shown in

Open circuit potential measurements of bronzes with 3% Sn and 7% Sn were recorded at weekly intervals during extended immersion tests in various acid solutions (artificial acid

Furthermore, Hochmannova and Vytrasova [28] obtained an efficient antibacterial effect with the use of nano zinc oxide in an aqueous acrylic dispersion at the content of 5

results_elpropr_(inputfilename) is an Excel file containing the calculated elastic properties of the laminate as a function of the number of cycles (N) or – in case

Rather than simply positing preconceived hypotheses and putting these to the test, grounded theory-inspired 23 Bosch, Reinoud 2008, Bringing Nuance into the Globalization

This gene is involved in the repair of DNA damages and hypermethylation is observed in several neoplastic and preneoplastic conditions [ 35 , 42 ] Recently, a meta-analysis