Sviluppi futur

Come possibile sviluppo futuro infine vi è la necessità di applicare i criteri proposti ad un dataset di compressori centrifugo ancora più ampio, in modo tale da correggere, se necessario, tali criteri ed individuare delle relazioni più generalizzate in base alla geometria del compressore. Quest’ultimo aspetto riguarda soprattutto il criterio della voluta che attualmente è stato possibile sviluppare solamente per i compressori C4 e C6.

188

Bibliografia

Capitolo 1

Carrard A., 1923, On calculations for centrifugal wheels, La Technique Moderne T.XV 3 e 4

Chriss R. M., Hathaway M. D., Wood J. R., 1996, Experimental and Computational Results from the NASA Lewis Low-Speed Centrifugal Impeller at Design and Part-Flow Conditions, ASME Journal of Turbomachinery, Vol. 118, No. 1

Cohen H., Rogers G. F. C., Saravannamutto H. I. H., 1996, Gas Turbine Theory, Longman Group UK Limited

Cumpsty N. A., 1989, Compressor Aerodynamics, Longman Group UK Limited.

Dawes W. N., 1995, A Simulation of the Unsteady Interaction of a Centrifugal Impeller with Its Vaned Diffuser: Flows Analysis, ASME Journal of Turbomachinery, Vol. 117, No. 2

Dean R. C., Senoo Y., 1960, Rotating Wakes in Vaneless Diffusers, ASME - Journal of Basic Engineering, Vol. 82

Della Volpe R., 2011, Macchine, Liguori Editore

Denton J. D., 1986, The Use of a Distributed Body Force to Simulate Viscous Effects in 3D Flow Calculations, ASME 31st International Gas Turbine Conference and Exhibit, Düsseldorf,

Eckardt D., 1975, Instantaneous measurements in the jet-wake discharge flow of a centrifugal compressor impeller, ASME - Journal of Engineering for Gas Turbines and Power

Fagan J. R., Fleeter S., 1992, Ldv-measurements of a mixed-flow impeller at design and near stall, ASME Paper No. 92-GT-310

Fowler H. S., 1968, The Distribution and Stability of Flow in a Rotating Passage. Journ. Engineering for Power, Vol 90

Gamma F., 2014, Appunti del corso di Motori per Aeromobili.

Hathaway M. D., Chriss R. M., Wood J. R., Strazisar, A. J., 1992, Computational investigation of the NASA low-speed centrifugal compressor flow field, ASME Paper No. 92-GT-213

Hawetorn W. R., 1974, Secondary Vorticity in Stratified Compressible Fluids in Rotating Systems, Cambridge Univ. Eng. Dept., CLIED/A-TuIbo/TR 63

Hirsch C., Kang S., PointelG., 1996, A Numerically Supported Investigation of the 3D Flow in Centrifugal Impellers Part 1: Validation Base, ASME Paper No. 96-GT-151

Horlock J. H., Lakshminarayana B., 1973, Secondary flows: theory, experiment and application in turbomachinery aerodynamics, Ann. Rev. Fluid Mech., vol. 5

Kearton, W.F., 1933, The Influence of the Number of Impeller Blades on the Pressure Generated in Centrifugal Compressor and on its General Performance, Institute of Mechanical Engineers

Krain, H., 1988, Swirling impeller flow, ASME Journal of Turbomachinery Mallamo F., 2008, Appunti del corso di Macchine

189 Satta A., 2012, Appunti del corso di Macchine

Simoni D., 2014, Corso di Progettazione delle Macchine e dei Sistemi Energetici

Smith A. G., 1957, On the generation of the Streamwise Component of Vorticity for Flows in a Rotating Passage, Aeronautiacal Quartely, Vol. 8

Van den Braembussche R. A., 2016, Radial compressor design and optimization.

Capitolo 2

Abdelhamid A. N., 1980, Analysis of rotating stall in vaneless diffusers of centrifugal compressors, ASME Paper No. 80-GT-184

Abdelhamid A. N., Colwill W. H.,Barrows J. F., 1979, Experimental investigation of unsteady phenomena in vaneless radial diffusers, ASME Paper No. 78-GT-23, Trans. ASME Journ. Eng. for Power 101(1): pp. 52-60

Ariga I. Masuda S., Ookita A., 1986, Inducer stall in a centrifugal compressor with inlet distortion, ASME Paper No. 86-GT-139

Arnulfi G. L., Giannattasio P., Giusto C., Massardo A. F., Micheli D., Pinamonti P., 1999, Multistage Centrifugal Compressor Surge Analysis: Part I – Experimental Investigation, Journal of Turbomachinery, Vol. 123, pp. 473-482

Arnulfi G. L., Giannattasio P.., Micheli D., Pinamonti P., 2001, An Innovative Device for Passive Control of Surge in Industrial Compression Systems, Journal of Turbomachinery, Vol. 121, pp. 305- 311

Baghdadi S., McDonald A. T., 1975, Performance of three Vaned Radial Diffusers with swirling Transonic Flow, Trans. ASME, Journal of Fluid Engineering, pp. 155-173

Bonciani L.,Ferrara P. L., Timori A., 1980, Aero-induced vibrations in centrifugal compressors. Prooceedings of Rotordynamic Instability Problems in High Performance Turbomachinery, Texas A&M University, NASA CP2133, pp. 85-94

Bonciani L.,Terrinoni L., Tesei A., 1982, Unsteady flow phenomena in industrial centrifugal compressor stage. Proceedings of Rotordynamic Instability Problems in High Performance Turbomachinery, Texas A&M University. NASA CP 2250, pp. 344-364.

Came P., Herbert M., 1980, Design and experimental performance of some high pressure ratio centrifugal compressors, AGARD CP 282 Centrifugal Compressors, Flow Phenomena and Performance, Paper 15

Chen J., Hasemann H., Seidel U., Jin D., Huang X., Rautenberg M., 1993, The interpretation of internal pressure patterns of rotating stall in centrifugal compressor impellers, ASME Paper No. 93- GT-192

Chen J., Hasemann H., Shi L., Rautenberg M., 1994, Stall inception behaviour in a centrifugal compressor, ASME Paper No. 94-GT-159

Clements W., Artt D., 1987, Perfomanc eprediction and Impeller-Diffuser Matching for Vaned Diffuser Centrifugal Compressors, IMechE C256/87, pp. 183-198

190 Conrad O., Raif K., Wessels M., 1980, The calculation of performance maps for centrifugal compressors, Performance Prediction of Centrifugal Pumps and Compressors, ASME Int. Gas Turbine Conference

Cumpsty N.A., Greitzer E. M., 1982, A simple model for Compressor Stall Cell Propagation, ASME Journal of Engineering for Power, Vol. 104, pp. 170-176

Day I. J., 1993, Stall inception in Axial Flow Compressors, J. of Turbomachinery, Vol. 115, pp. 1-9 Dean R. C. Jr, Young L. R., 1976, The fluid dynamic design of advanced centrifugal compressor, Creare TN-244

Dean R. C. Jr, Young L. R., 1977, The time domain of centrifugal compressor and pump stability and surge, Trans. ASME Journ. Fluids Eng, pp. 53-63

Dussourd J. L., Plannebecker G. W., Singhania S. K., 1977, An experimental investigation of the control of surge in a radial compressors using close coupled resistance, Trans. ASME Journ. Fluids Eng. 99(1): pp. 64-76

Ejiri E., Kosuge H., Ito T., 1983, A consideration concerning stall and surge limitations within centrifugal compressors, Part II, Proceedings of the I.G.T.C., Tokyo, pp. 478-485

Elder R. L., Gill M. E., 1984, A discussion of the factors affecting surge in centrifugal compressors, ASME Paper No. 84-GT-194, Trans. ASME Journ. Eng. Gas Turb. And Power, Vol. 107(2), pp. 499-506

Emmons H., Pearson C. E., Grant H. P., 1955, Compressor surge and stall propagation, Trans ASME, 77(4), pp. 455-469

Everitt J. N., Spakovszky Z. S., 2013, An investigation of Stall Inception in Centrifugal Compressor Vaned Diffuser, ASME J. of Turbomachinery, Vol. 135, 011025-10

Frigne P., Van den Braembussche R. A., 1984, Distinction between Types of Impeller and Diffuser Rotating in Centrifugal Compressors with Vaneless Diffuser, ASME J. of Eng. for Gas Turbines & Power, Vol. 106, No 2, pp. 468-474

Frigne P., Van den Braembussche R. A., 1985, A theoretical Model for Rotating Stall in the Vaneless Diffuser of Centrifugal Compressors, ASME J. of Eng. for Gas Turbines & Power, Vol. 107, No 2, pp. 468-474

Fowler H., 1968, The distribution and stability of flow in a rotating channel, J. Engineering for Power, Vol. 90, No 3, pp. 229-235

Graham R., Guentert E. C., 1965, Compressor stall and blade vibration

Gretizer E. M., 1976, Surge and rotating stall in axial flow compressors, Trans. ASME Journ. Eng. For Power, 98(2), pp. 190-217.

Greitzer E. M., 1976, Surge and rotating stall in axial flow compressors, Trans. ASME Journ. Eng. for Power, 98(2), pp. 190-217

Gretizer E. M., 1981, The stability of pumping systems, The 1980 Freeman Scholar lecture, Trans. ASME Journ. Fluids Eng., 103(2), pp. 193-242

Gyarmathy G., 1996, Impeller Diffuser Momentum exchange during rotating stall, ASME International Mechanical Engineering Congress & Exhibition, paper 96-WA/PID-6

191 Hasemann H., Chen J., Rautenberg M., 1993, Internal Transient Pressure Patterns during Rotating Stall in Centrifugal Impellers, Proceedings of 2ND ISAIF Symposium Prague, pp. 291-302

Haupt U., Bammert K., Rautenberg M., 1985, Blade vibration on centrifugal compressors: Blade response to different excitation conditions, ASME Paper No. 85-GT-93

Hunziker R., Gyarmathy G., 1994, The operational stability of a centrifugal compressor and its dependence on the characteristics of the subcomponents, Trans. ASME, Journal of Turbomachinery, Vol. 116, pp. 250-259

Imaichi K., Tsurusaki H., 1979, Rotating stall in a vaneless diffuser of centrifugal fan, ASME Winter Annual Meeting 1979, Flow in Primary, Non-Rotating Passages in Turbomachines

Jansen W., 1964, Rotating stall in a radial vaneless diffuser. J. Basic Engineering, Vol. 86, No 4, pp.750-758

Japikse D., 1980, The influence of diffuser inlet pressure fields on the range and durability of centrifugal compressor stages, Centrifugal Compressors, Flow Phenomena and Performance, AGARD Conference Proceedings No. 282

Japikse D., 1986, Advanced experimental techniques in turbomachinery, Concepts ETI Japikse D., 1996, Centrifugal Compressor Design and Performance, Concepts ETI, Inc.

Kammer N., Rautenberg M., 1982, An experimental investigation of rotating stall flow in centrifugal compressors, ASME Paper No. 82-GT-82

Kammer N., Rautenberg M., 1986, A distinction between different types of stall in a centrifugal compressor stage, Trans. ASME Journ. Eng. Gas Turb and Power, 108(1), pp. 83-92

Kenny D., 1970, Supersonic radial diffusers, AGARD LS 39 in “Advanced compressors”, AGARD LS-39

Kenny D., 1972, A comparison of the predicted and measured performance of high pressure ratio centrifugal compressor diffusers, VKI Lecture Series 50 Advanced Radial Compressors

Kinoshita Y., Senoo Y., 1985, Rotating stall induced in vaneless diffusers of very low specific speed centrifugal blowers, Trans. ASME Journ. Eng. Gas Turb. and Power, 107(2), pp. 514-521

Kobayashi H., Nishida H., Takagi T., FukushimaY., 1990, A study on the rotating stall of centrifugal compressors, (2NDReport: Effect of vaneless diffuser inlet shape on rotating stall), Trans. Japan Society of Engineers (B edition), 56(529), pp. 98-103

Kosuge H. Ito T., Nakanishi K., 1982, A consideration concerning stall and surge limitations within centrifugal compressors, ASME Paper No. 82-GT-15

Krain H., 1981, A study on centrifugal impeller and diffuser flow, J. Engineering for Power, Vol. 103, No 4, pp. 688-697

Lennemann E., Howard J. H. G., 1970, Unsteady flow phenomena in rotating centrifugal impeller passages, Trans. ASME Journ. Eng. For Power, 92(1), pp. 65-72

Longley J. P., 1994, Review of Nonsteady Flow Models for Compressor Stability, J. Turbomach Vol. 116(2), pp. 202-215

Mizuki S., Kawashima Y., Ariga I., 1978, Investigation concerning rotating stall and surge phenomena within centrifugal compressor channels, ASME Paper No. 78-GT-9