[2] W. Göpel, J. Hesse, J. N. Zemel, “Optical Sensors”, Sensors, A Comprehensive Survey, vol.6, pp 400-413.

Bibliografia 137

Bibliografia

[1] H.H. Ban, N. F. de Rooij, B. Kloek, “Mechanical Sensors”, W. Göpel, J.

Hesse, J. N. Zemel, Sensors, A Comprehensive Survey, vol.7, pp 111-125, 146- 171.

[2] W. Göpel, J. Hesse, J. N. Zemel, “Optical Sensors”, Sensors, A Comprehensive Survey, vol.6, pp 400-413.

[3] M.Elwenspoek, R. Wiegerink, “Mechanical Microsensors”, Springer, pp 106- 131, 229-250.

[4] J. W. Gerdner, “Microsensors”, Priciples & Applications, Wiley, pp 183-187.

[5] S. M. Sze, “Semiconductor Sensors”, Wiley, New York, pp 501-511

[6] M. Yamada, T. Takebayashi, C. Notoyama, K. Watanabe, “A Switched- Capacitor Interface for Capacitive Pressure Sensors”, IEEE Transactions on Instrumentation and Measurement, vol. 41, no. 1, February 1992, pp 81-86

[7] K. Kasten, N. Kordas, H. Kappert, W. Wokwa, “Capacitive pressure sensor with monolithically integrated CMOS readout circuit for high temperature applications”, Sensors and Actuators A 97-98 (2002), pp 83-87

[8] H. K. Trieu, M. Köster, H. Kappert, M. Schmidt, W. Mokwa “Monolithic integrated surface micromachined pressure sensors with analog on-chip linearization and temperature compensation”, Micro Electro Mechanical Systems, 2000. MEMS 2000. The Thirteenth Annual International Conference on, 23-27 Jan. 2000, pp 547-550

[9] J. W. Fattaruso, R. G. Meyer, “MOS Analog Function Synthesis”, IEEE

Jounal of Solid-State Circuits, vol. SC-22, no. 6, December 1987, pp 1056-1063

[10] A. Pasavento, C. Hoch,“A wide linear range four quadrant multiplier in

subthreshold CMOS”, Circuits and Systems, 1999. ISCAS ’99. Proceedings of the

1999 IEEE International Symposium on, vol. 2, 30 May – 2 June 1999, pp 240-

243

Bibliografia 138

[11] M. Siripruchyanum, P. Wardkein, “A Four-quadrant Anlog Multiplier Based on Switched-capacitor and Pulse-Width Amplitude Modulation Tecniques”, Electronics, Circuit and Systems, 2002. 9

International Conference on. Vol: 1, 15-18 Sept. 2002, pp 235-238

[12] C. C. ENZ, G. TEMES, “Circuit Techniques for Reducing the Effect of Op- Amp Imperfections: Autozeroing, Correlated Double Sampling, and Chopper Stabilization”, Proc. IEEE, vol. 84, no. 11, Nov. 1996, pp 1584-1614

[13] O. Oliaei, “ Noise Analysis of Correlated Double Sampling SC- Intergrators”, Circuits and Systems, 2002 ISCAS 2002. IEEE International Symposium on, vol 4, 26-29 May 2002, pp 445-448

[14] M. Lemkin, B. E. Boser, “A Three-Axis Micromachined Accelerometer with a CMOS Position-Sense Interface and Digital Offset-Trim Electronics”, IEEE Journal of Solid-State Circuit, vol. 34, no. 4, April 1999, pp 456-468

[15] N. Woungkomet, B. E. Boser,“Correlated Double Sampling in Capacitive Position Sensing Circuits for Micromachined Applications”, Circuits and Systems, 1998. IEEE APCCAS 1998. The 1998 Asia-Pacific Conference on, 24- 27 Nov. 1998, pp723-726

[16] J. Krupar, R. Srowik, J. Schreiter, A. Graupner, R. Schüffny, U. Jörges,

“Minimizing Charge Injection Errors in High-Precision, High-Speed SC- Circuits”, Circuits and Systems, 2001 ISCAS 2001. The 2001 IEEE International Symposium on , vol. 1, 6-9 May 2001, pp 727-730

[17] P. Bruschi, D. Navarrini, G. Tarroboiro, G. Raffa, “A Computationally Efficient Technique for the Optimization of Two Stage CMOS Operational Amplifiers”, ECCTD’03 – European Conference on Circuit Theory and Design, vol III, pp. 305-308, Cracovia 2003

[18] P. Wu, R. Schaumann, P. Latham, “ Design Considerations For Common- Mode Circuit In Fully-Differential Operational Transconductance Amplifiers with Tuning”, Circuits and Systems, 1991, IEEE International Symposium on, 11-14 June 1991, pp 1363-1366

[19] H. Recoules, R. Bouchakour, P. Loumeau, “A Comparative Study of Two SC-CMFB Network Used in Fully Differential OTA”, Electronics, Circuits and Systems, 1998 IEEE International Conference on, vol. 2, 7-10 Sept. 1998,

pp 291-294

[20] O. Choksi, L. R. Carley,“Analysis of Switched-Capacitor Common-Mode

Feedback Circuit”, IEEE Transactions on Circuits and Systems –II: Analog and

Digital Signal Processing, vol. 50, no. 12, December 2003, pp 906-917

Bibliografia 139

[21] R. Gregorian, G. Themes, “Analog MOS Integrated Circuits for signal processing”, A Wiley-Interscience Pubblication JOHN WILEY & SONS, pp 500- 513

[22] R. J. Backer, H. W. Li, D. E. Boyce, “CMOS circuit design, layout and simulation”, IEEE Press series on microelectronic systems S. K. Tewksbury, series editor CMOS, cap 26, 27

[23] R. Unbehauen, A. Cichocki, “MOS Switched-Capacitor and Continuous- Time Integrated Circuit and Systems”, Springer-Verlag , pp 509-513

[24] T. Shih, L. Der, S. H. Lewis, P. J. Hurst, “A Fully Differential Comparator Using a Switched-Capacitor Differencing Circuit with Common-Mode Rejection”, IEEE Journal of Solid-State Circuits, vol. 32, no. 2, February 1997, pp 250-253

[25] D. J. Allstot, “A Precision Variable-Supply CMOS Comparator”, IEEE Journal of Solid-State Circuits, vol. SC-17, no. 6, December 1982, pp 1080-1087 [26] Mentor Graphics, “Eldo User’s Manual” software version 6.2_1 Release 2003.3, cap. 16: “MOS Model 9 Equations”

[27] A. Hastings, “The Art of Analog Layout”, Hardcover, pp 118-124, 230-257,

426-442.