[1] US-NRC 10CFR50.46 Appendix K, “Acceptance criteria for emergency core cooling systems for light-water nuclear power reactors.”, and Appendix K to10 CFR 50, “ECCS Evaluation Models” U.S. Federal Register, 39, 3,January 4, 1974 [2] US-NRC, “Emergency Core Cooling Systems, Revisions to Acceptance Criteria”,
Federal Register 53, 180, September 16, 1988.
[3] Technical Program Group (BOYAK, B.E. et al.), “Quantifying Reactor Safety Margin Parts 1 to 6”, Nuclear Engineering and Design (NED), 119, 1990, pp. 1-117.
[4] G. ORTIZ, L.S. GHAN, “Uncertainty Analysis of Minimum Vessel Liquid Inventory During a Small-Break LOCA in a B&W plant”, NUREG/CR-5818, 1992.
[5] H. GLASERS, R. POCHARD, “Review on Uncertainty Methods for Thermal Hydraulic Computer Codes”, Proc. Int. Conf. on New Trends in Nuclear System Thermal-hydraulics, Pisa, Italy, May 30 –June 2, Vol. 1, 1994, pp. 447-455.
[6] OECD/CSNI, “Report of a CSNI workshop on Uncertainty analysis methods, London 1-4 March1994”, NEA/CSNI/R(1994)20, Vol. 1 and 2, OECD/NEA/CSNI, Paris, 1994 .
[7] D’AURIA, F., DEBRECIN, N., GALASSI, G.M., “Outline of the uncertainty methodology based on accuracy extrapolation”, Nucl. Technol. 109 1 (1995) 21– 38.
[8] WICKETT, T., et al., “Report of the Uncertainty Methods Study for Advanced Best Estimate Thermal Hydraulic Code Applications”, 2 vol., Rep. NEA/CSNI R(97)35, OECD, Paris (1998).
[9] H. GLASERS “GRS Method for Uncertainty and Sensitivity Evaluation of Code Results and Applications ”. Science and Technology of Nuclear Installations Volume 2008, Article ID 798901, 7 pages.
[10] SALTELLI A., CHAN K., SCOTT E. M. (Editors), “Sensitivity Analysis”, John Wiley & Sons Ltd., West Sussex, United Kingdom, (2000).
[11] A. PETRUZZI, Ph.D. Thesis “Development and application of methodologies for sensitivity analysis and uncertainty evaluation of the results of the best estimate system codes applied in nuclear technology”, University of Pisa (2008).
[12] NEA/CSNI, Task Group on Safety Margins Action Plan (SMAP) “Safety Margins Action Plan”, Final Report. NEA/CSNI/R(2007)9.
[13] A. PETRUZZI, F. D’AURIA, “Approaches, Relevant Topics, and Internal Methods for Uncertainty Evaluation in predictions of Thermal-Hydraulic system
Codes”, Hindawi Publishing corporation, Science and Technology of nuclear installations (2008).
[14] S. N. AKSAN, F. D’AURIA, and H. ST¨ADTKE, “User effects on the thermal-hydraulic transient system code calculations”, Nuclear Engineering and Design, vol. 145, no. 1-2, pp. 159–174, 1993.
[15] IAEA, “Accident analysis for nuclear power plants”, Safety report series N°23, Vienna, 2002.
[16] IAEA, “Safety margins of operating reactor. Analysis of Uncertainties and implications for decision making”, IAEA TEC-DOC-1332, Vienna, 2003.
[17] Compendium of ECCS Research for Realistic LOCA Analysis, NUREG-1230, August 1988.
[18] OECD/CSNI, “Report on the Uncertainty Methods Study”, Report NEA/CSNI/R(97)35, Vol. 1 and 2, OECD/NEA/CSNI, Paris, 1997.
[19] OECD/NEA/CSNI, “CSNI Status Summary on Utilization of Best-Estimate
Methodology in Safety Analysis and Licensing”, NEA/CSNI/R (1996) 19, OECD Nuclear Energy Agency, Paris, 1996.
[20] ZHANG J., BAJOREK S. M., KEMPER R. M., NISSLEY M. E., PETKOV N., HOCHREITER L. E., “Application of the WCOBRA/TRAC best estimate methodology to the AP600 large-break LOCA analysis”, Nuclear Engineering and Design, 279-301, 1998.
[21] LUXAT J. C., HUGET R. G., LAU D. K., TRAN F., “Development and Application of Ontario Power Generation’s Best Estimate Nuclear Safety Analysis Methodology”, International Meeting on “Best Estimate” Methods in Nuclear Installation Safety Analysis (BE-2000), Washington D.C. , 2000.
[22] CACUCI D. G., “Sensitivity and Uncertainty Analysis, Theory”, I, Chapman & Hall/CRC, Boca Raton (Fl, US), ISBN 1-58488-115-1 (2003).
[23] CACUCI D. G., IONESCU-BUJOR M., NAVON I.M., “Sensitivity and Uncertainty Analysis, Application to Large Scale Systems” II, Chapman & Hall/CRC, Boca Raton (Fl, USA), ISBN-10 1-58488-116-X (2005).
[24] CACUCI D. G., “Global Optimization and Sensitivity Analysis”, Nuclear Science and Engineering, 104, 78, 1990.
[25] CACUCI D. G., “On the Use of Adjoint Operators for Global Optimization and Data Assimilation”, Lectures Notes; Workshop on “Predictability, Observations, and Uncertainties in Geosciences”, Florida State University, Tallahassee, Florida, USA, March 13-15, 2006.
[26] BOYACK B. E., CATTON I., DUFFEY R. B., GRIFFITH P., KATSMA K. R., LELLOUCHE G. S., LEVY S., ROHATGI U. S., WILSON G. E., WULFF W., ZUBER N., “Quantifying Reactor Safety Margin”, Parts 1 to 6., J. Nuclear Engineering and Design., 1-117 (1990).
[27] HELTON J. C. and SHIVER A. W., “A Monte Carlo Procedure for the Construction of Complementary Cumulative Distribution Functions for Comparison with the EPA Release Limits for Radioactive Waste Disposal”, SAND94-2128 (1994).
[28] HOCHREITER L. E., “Comments on Quantifying Reactor Safety Margins”, J. Nuclear Engineering & Design 409–410 (1992).
[29] WILKS S. S, “Determination of sample sizes for setting tolerance limits”, Ann. Math. Statist., pp. 91-96 (1941).
[30] OECD/CSNI/NEA, “The BEMUSE programme (Best-Estimate-Methods – Uncertainty and Sensitivity Evaluation ”.
[31] H. GLASERS, E. CHOJNACKI, “Progress in Uncertainty Analysis Method”. [32] F. DEPISCH, G. SEEBERGER, S. BLANK “Application of Best-Estimate
Methods to LOCA in a PWR”, OECD/CSNI Seminar on Best Estimate Methods in Thermal-Hydraulic Safety Analysis, Ankara, Turkey (1998).
[33] B. BOYACK, et al. “Quantifying Reactor Safety Margins”, six papers in Nuclear Engineering and Design, Vol. 119, No 1 (1990).
[34] D’AURIA F., DEBRECIN N., GALASSI G. M., "Outline of the Uncertainty Methodology based on Accuracy Extrapolation (UMAE)", J. Nuclear Technology, No 1, pp 21-38 (1995).
[35] A. PETRUZZI, F. D’AURIA, “Accuracy Quantification: Description of the Fast Fourier Transform Based Method (FFTBM)”, DIMNP NT 556(05), May, 2005. [36] N. POPOV, Lectures 3B “ Best Estimate Analysis and Uncertainty (BEAU)
Methodology for CANDU Applications”, seminar and training on Scaling, Uncertainty an 3D COuPled calculations in nuclear technology, Petten, Netherlands. (October, 2008).
[37] M. LUDMANN, J.Y. SAUVAGE, “LB LOCA Analysis Using the Deterministic Realistic Methodology – Application to the 3-Loop Plant”, 7th International Conference on Nuclear Engineering, Tokyo, Japan (1999).
[38] A. PETRUZZI, F. D’AURIA, “Thermal-hydraulic System Codes in Nuclear Reactor Safety and Qualification Procedures”, Hindawi Publishing Corporation,
Science and technology of Nuclear Installations, Volume 2008.
[39] R. P. MARTIN, L. D. O’DELL, “AREVA’s realistic large break LOCA analysis methodology”, Nuclear Engineering and Design 235 (2005) 1713–1725. February 2005.
[40] CALLAERT M., CROMMELYNCKX Y., DESCHUTTER P., STUBBE E. and VANHOENACKER L., "The Belgatom methodology for licensing non loca transients by means of the estimate code RELAP5 mod2”, Proc. IAEA Technical Meeting on Comparison of Best Estimate Methods for Judging Design Margins of AWCR’s, Lyon, France (1994).
[41] S.M. BAJOREK, et al., “Code qualification document for best estimate LOCA analysis”, Tech. Rep. WCAP 12945 NP-A, Westinghouse Electric Company, Pittsburgh, Pa, USA, 1998.
[42] K. TAKEUCHI and M. Y. YOUNG, “Assessment of flooding in a best estimate thermal hydraulic code (WCOBRA/TRAC)”, Nuclear Engineering and Design, vol. 186, no. 1-2, pp. 225–255, 1998.
[43] C. FREPOLI, M. E. NISSLEY, and K. OHKAWA, “Assessment of the emergency core cooling system (ECCS) performance for current and advanced plant designs using WCOBRA/TRAC ”, in Proceedings of International Congress on Advances in Nuclear Power Plants (ICAPP ’03), Cordoba, Spain, May 2003
[44] C. FREPOLI, L. ORIANI, “Notes on the Implementation of Non-Parametric Statistics within the Westinghouse Realistic Large Break LOCA Evaluation Model (ASTRUM)”, Proceedings of ICAPP ’06, Reno, NV, USA, June 4-8, 2006. [45] C. FREPOLI, “An Overview of Westinghouse Realistic Large Break LOCA valuation Model”, Hindawi Publishing Corporation Science and Technology of Nuclear Installations Volume 2008, Article ID 498737. August 2007.
[46] A. GUBA, M. MAKAI, and L. P´AL, “Statistical aspects of best estimate method-I”, Reliability Engineering & System Safety, vol. 80, no. 3, pp. 217–232, 2003. [47] IAEA, “Best Estimate Safety Analysis for Nuclear Power Plant: Uncertainty
Evaluation”, Safety Reports Series N. 52, Vienna 2008
[48] D’AURIA F., GALASSI G. M, “Best-Estimate Analysis and Uncertainty Evaluation of the Angra-2 LBLOCA DBA”, Internal report, DIMNP NT 433(01), Rev. 0, Pisa, Italy (July 2001)
[49] PETRUZZI A., GIANNOTTI W., D’AURIA F., “Development, Qualification and Use of a Code with the Capability of Internal Assessment of Uncertainty”, CNS, Sixth International Conference on Simulation Methods in Nuclear Engineering, Montreal, Canada (2004)
[50] PETRUZZI A., GIANNOTTI W., D’AURIA F., IVANOV K., “Enlargement of the Uncertainty Database of the CIAU Methodology”, PHYSOR 2004, Chicago, Illinois, USA (2004)
[51] D’AURIA F., GIANNOTTI W., “Development of Code with capability of Internal Assessment of Uncertainty”, J. Nuclear Technology, 131, No. 1, pp 159-196 (2000).
[52] USNRC and OECD/CSNI, “Proceedings of the OECD/CSNI Workshop on Transient Thermal-hydraulic and Neutronic Codes Requirements”, Annapolis and US NRC NUREG/CP-0159 and OECD/CSNI NEA/CSNI R(97)4, Washington, DC, USA (1997).
[53] OECD/CSNI, “Best-estimate Methods in Thermal Hydraulic Safety Analysis: Summary and conclusions of an OECD-CSNI Seminar”, NEA/CSNI/R(99) 22, Paris, France (1999).
[54] A. PROSˇEK, F. D’AURIA, B. MAVKO “Review of quantitative accuracy assessments with fast Fourier transform based method (FFTBM)”, Nuclear Engineering and Design 217 (2002) 179–206
[55] D’AURIA F., A. ERAMO, and W. GIANNOTTI, “Advancements in Planning an IAU Code”, 4th Regional Meeting. Nuclear Energy in Central Europe-Bled, Slovenia, September 7- 10, 1997.
[56] D’AURIA F., V. FALUOMI, and N. AKSAN, “A Proposed Methodology for the Analysis of a Phenomenon in Separate Effects and Integral Test Facilities”, Kerntechnik, 60, 4, 166 (1995).
[57] HELF H., G. BAVA, M. CHAMP, T. RAGA, D. J. HANSON, H. L. O. HOLMSTROM, G. JUNG,R. MANDL, J. MIETTINEM, S. A. NAFF, B. PUTTER, and M. TANAKA, “Catalogue of Generic Plant States Leading to Core Melt in PWRs”, OECD/NEA/CSNI/R(96), November 1996.
[58] GROENEVELD D. C., L. K. H. LEUNG, P. L. KIRILOV, Vo P. BOBKOV, I. P. SMOGALEV, V. N. VINOGRADOV, X. C. HUANG, and E. ROYER, “ The 1995 Look-Up Tables for Critical Heat Flux in Tubes”, Nucl. Eng. Des., 163, 1996.
[59] D’AURIA F., GALASSI G. M., "Code Validation and Uncertainties in System Thermal-hydraulics", J. Progress in Nuclear Energy, 33, No 1&2, pp 175-216 (1998).
[60] D’AURIA F., GALASSI G. M., GIANNOTTI W., “Confirmatory Safety Analyses Carried Out by Relap5 and Cathare Codes Related to the Kozloduy VVER
440/230 Unit No 3”, Internal report, DIMNP NT 440(01), Rev.0, Pisa, Italy (2001).
[61] D’AURIA F., GALASSI G. M., GIANNOTTI W., “Best Estimate and Uncertainty Evaluation of LBLOCA 500 mm for Kozloduy Unit 3 NPP”, Internal report, DIMNP NT 544(04), Rev.0, Pisa, Italy (2004).
[62] D’AURIA F., GALASSI G. M, “Best-Estimate Analysis and Uncertainty Evaluation of the Angra-2 LBLOCA DBA”, Internal report, DIMNP NT 433(01), Rev. 0, Pisa, Italy (July 2001).
[63] D’AURIA F., GALASSI G. M., GIANNOTTI W., “Confirmatory Safety Analyses Carried Out by Relap5 and Cathare Codes Related to the Kozloduy VVER 440/230 Unit No 3”, Internal report, DIMNP NT 440(01), Rev.0, Pisa, Italy (2001).
[64] F. D’AURIA, M. LEONARDI, H. GLASER, R. POCHARD, “Current Status of methodologies evaluating the uncertainties in the prediction of thermal-hydraulic phenomena in nuclear reactors”, Int. Symp. On Two Phase Flow Modelling and Experimentation – Rome (I), October 1995.
[65] W. L. RIEBOLD, C. ADDABBO, L. PIPLIES, H. STAEDTKE “LOBI Project: Influence of PWR Primary Loops on blowdown”, Commission of the European communities, Joint Research Centre Ispra Establishment – Italy, August 1984. [66] ASHLEY, R., EL-SHANAWANY, M., ELTAWILA, F., D’AURIA, F., “Good
Practices for User Effect Reduction”, Status Report, NEA/CSNI/R(98)22, Paris 1998.
[67] M. KRISTOF, T. KLIMENT, A. PETRUZZI, J. LIPKA, “ Relap5 simulation of surge line break accident using combined and best estimate plus uncertainty approaches”, Nuclear engineering and Design, January 2009.
[68] SUSA 3.5 “User’s Guide and Tutorial”, Gesellschaft Fur Anlagen-und Reaktorishernheit (GRS) mbH.
[69] L. REGEL, E. OHLMER, “ Experimental Data Report on LOBI test A1_06”, Commission of the European communities, Joint Research Centre Ispra Establishment – Italy, April 1982.
[70] E. OHLEMR, J. SANDERS, “Experimental Data Report on LOBI test A1_66”, Commission of the European communities, Joint Research Centre Ispra Establishment – Italy, September 1982.
[71] A. PETRUZZI, F. D’AURIA, “Thermal-Hydraulic System codes in Nuclear Reactor Safety and Qualification procedures”, Hindawi Publishing Corporation,
Science and technology of nuclear installations, Article ID 460795 Volume 2008. [72] D. LAZZERINI, Ms Thesis, “Accident Analysis for ATUCHA 2 Nuclear Power
Plant”, University of Pisa, 2007.
[73] “CANDU 6 Technical summary report”, CANDU 6 Program Team Reactor Development Business Unit, June 2005.
[74] F. D’AURIA, M. CHERUBINI, A. DEL NEVO, G. GALASSI, W. GIANNOTTI, F. MORETTI, C. PARISI, M. PECCHIA, A. PETRUZZI, M. ADORNI, F. TERZUOLI, “Addressing the uncertainty in the prediction of the power peak following 2x100% area LBLOCA in Atucha-2 NPP”, University of Pisa, DIMNP-GRNSPG, Internal Report NT 642(09) – rev.0.
[75] CNA II PSAR 1981.Vol. 1.
[76] MAYERS “System description reactor, reactor coolant and moderator system”, R10-85-e1002 Erlangen, 1985.
[77] O. MAZZANTINI, “Overview of CNA II NPP”, First meeting of IRG. Pisa 26 - 28 Feb. 2007.
[78] F. D’AURIA, M. CHERUBINI, A. DEL NEVO, G. GALASSI, W. GIANNOTTI, F. MORETTI, C. PARISI, M. PECCHIA, A. PETRUZZI, M. ADORNI, F. TERZUOLI, “ CNA-2 LBLOCA report” University of Pisa, Internal report, 2007. [79] J. L. RODGERS and W. A. NICEWANDERS, “Thirteen ways to look at the
correlation coefficient”, The American Statistician, 42(1):59–66, Feb 1988. [80] L. AMMIRABILE, F. D’AURIA, A. GARCIA, “Qualification process of
LOBI/MOD1 Nodalization for Experiment A1-04 analysis with Relap5/Mod3.2”, Internal report NT 340 (98), University of Pisa 1998.
[81] A. Petruzzi “Procedures for nodalization qualification, (at steady-state and at transient level)”, Lecture 21A, 3D S.UN.Cop. 2007, Hamilton & Niagara Falls, Ontario, Canada.
