9.1 ANALISI INDICATORI BIBLIOMETRICI
Alla data del 26 settembre 2020, lo scrivente risulta autore e/o co‐autore di circa 121 pubblicazioni scientifiche, la cui collocazione editoriale si ripartisce in:
49 articoli su rivista dotata di ISSN e basati su processo di blind peer review;
6 contributi su capitoli di libro (pubblicazioni dotate di ISBN);
40 contributi su Atti di Congressi Internazionali, di cui 16 full papers, 4 full papers con processo di blind peer review, 9 long abstracts, 1 long abstract con processo di blind peer review e 10 short abstracts;
25 articoli su Atti di Congressi Nazionali, di cui 18 full papers, 2 full papers con processo di blind peer review, 1 long abstracts e 4 short abstracts;
1 editoriale (curatela);
In Tabella 1 si riportano gli indici bibliometrici valutati da Scopus, relativi all’intera produzione scientifica, mentre in Tabella 2 si riporta un confronto con gli indicatori bibliometrici di soglia indicati da ANVUR nell’ambito dell’Abilitazione Scientifica Nazionale e dell’accesso al ruolo di Commissario.
Dalla tabella 2 si evince in particolare che gli indici dello scrivente rimangono superiori alla soglia per l’accesso al ruolo di Commissario, anche nello scenario più svantaggioso, ovvero escludendo le autocitazioni di tutti i co‐autori (stima basata sugli strumenti di analisi di Scopus).
Dalla piattaforma Scopus si evince anche che la percentuale di autocitazioni è pari al 18.7 %
Tabella 1: dati bibliometrici relativi alla produzione scientifica (fonte: Scopus, author_ID 15077007500):
Numero di prodotti
indicizzati
Numero di Articles
indicizzati Citazioni H‐Index
Valori posseduti 71 49 912 17
Tabella 2: confronto indicatori di soglia per il S.C. 09/A3 SSD Ing‐Ind/14 (fonte: https://www.anvur.it/attivita/asn/asn‐2018‐
2020/indicatori‐e‐relative‐soglie/).
Gli indicatori dello scrivente sono ottenuti consultando la piattaforma SCOPUS, ove il numero di prodotti classificati come “Articles” è riferito al periodo a decorrere dall’01 gennaio 2010, e le citazioni e l’H‐Index sono calcolati su tutti i prodotti indicizzati, a partire dall’01 gennaio 2005.
1 riga 3: gli indici sono calcolati includendo le autocitazioni; 2 riga 4: gli indici sono calcolati escludendo le autocitazioni; 3 riga 5: gli indici sono calcolati escludendo le autocitazioni di tutti i co‐autori.
Numero articoli 10 anni Numero citazioni 15 anni Indice H 15 anni
Soglie Ia fascia 15 267 9
Soglie Commissari 23 362 11
G. Pitarresi 1 43 781 17
G. Pitarresi 2 43 625 15
G. Pitarresi 3 43 553 14
9.2 ARTICOLI PUBBLICATI SU RIVISTE DOTATE DI ISSN, IMPACT FACTOR E BLIND PEER REVIEW
Date ()
[1] Pitarresi G, Cappello R, Catalanotti G. Quantitative thermoelastic stress analysis by means of low‐cost setups. Opt Lasers Eng 2020;134:106158. doi:10.1016/j.optlaseng.2020.106158.
[2] Cappello R, Pitarresi G, Xavier J, Catalanotti G. Experimental determination of mode I fracture parameters in orthotropic materials by means of Digital Image Correlation. Theor Appl Fract Mech 2020;108:102663.
doi:https://doi.org/10.1016/j.tafmec.2020.102663.
[3] Scaffaro R, Maio A, Gulino EF, Pitarresi G. Lignocellulosic fillers and graphene nanoplatelets as hybrid reinforcement for polylactic acid: Effect on mechanical properties and degradability. Compos Sci Technol 2020;190.
doi:10.1016/j.compscitech.2020.108008.
[4] Pitarresi G, Scalici T, Dellaira M, Catalanotti G. A methodology for the rapid characterization of Mode II delamination fatigue threshold in FRP composites. Eng Fract Mech 2019;220. doi:10.1016/j.engfracmech.2019.106629.
[5] Pitarresi G, Scalici T, Catalanotti G. Infrared Thermography assisted evaluation of static and fatigue Mode II fracture toughness in FRP composites. Compos Struct 2019;226:111220. doi:10.1016/J.COMPSTRUCT.2019.111220.
[6] Montinaro N, Cerniglia D, Pitarresi G. Evaluation of Vertical Fatigue Cracks by Means of Flying Laser Thermography. J Nondestruct Eval 2019;38. doi:10.1007/s10921‐019‐0586‐5.
[7] Pavan D, Pitarresi G, Morello F, Monachino F, Sanfilippo A, D’arienzo A, et al. Does the 5‐strand‐graft have superior biomechanical behaviour than 4‐strand‐graft during acl reconstruction? Muscles Ligaments Tendons J 2019;9.
doi:10.32098/mltj.03.2019.12.
[8] Meneghetti G, Ricotta M, Pitarresi G. Infrared thermography‐based evaluation of the elastic‐plastic J‐integral to correlate fatigue crack growth data of a stainless steel. Int J Fatigue 2019;125:149–60.
doi:10.1016/j.ijfatigue.2019.03.034.
[9] Meneghetti G, Ricotta M, Pitarresi G. On relation between J‐integral and heat energy dissipation at the crack tip in stainless steel specimens. Frat Ed Integrita Strutt 2019;13:82–96. doi:10.3221/IGF‐ESIS.49.09.
[10] Montinaro N, Cerniglia D, Pitarresi G. Evaluation of interlaminar delaminations in titanium‐graphite fibre metal laminates by infrared NDT techniques. NDT E Int 2018;98.
[11] Montinaro N, Cerniglia D, Pitarresi G. A Numerical Study on Interlaminar Defects Characterization in Fibre Metal Laminates with Flying Laser Spot Thermography. J Nondestruct Eval 2018;37.
[12] Pitarresi G, Toscano A, Alessi S. Fracture toughness of synthesised high‐performance epoxies subject to accelerated water aging. Polym Test 2018;68.
[13] N. Montinaro, D. Cerniglia, G. Pitarresi, A numerical and experimental study through laser thermography for defect detection on metal additive manufactured parts, Frat. Ed Integrita Strutt. 12 (2018) 231–240.
[14] Mancuso A, Pitarresi G, Tumino D. Using FEM simulation to predict structural performances of a sailing dinghy. Int J Interact Des Manuf 2017:1–12.
[15] N. Montinaro, D. Cerniglia, G. Pitarresi, Flying Laser Spot Thermography technique for the NDE of Fibre Metal Laminates disbonds, Compos. Struct. 171 (2017) 63–76.
[16] N. Montinaro, D. Cerniglia, G. Pitarresi, Detection and characterisation of disbonds on Fibre Metal Laminate hybrid composites by flying laser spot thermography, Compos. Part B Eng. 108 (2017) 164–173.
[17] S. Alessi, A. Toscano, G. Pitarresi, C. Dispenza, G. Spadaro, Water diffusion and swelling stresses in ionizing radiation cured epoxy matrices, Polym. Degrad. Stab. 144 (2017) 137–145.
[18] G. Catalanotti, C. Furtado, T. Scalici, G. Pitarresi, F.P. van der Meer, P.P. Camanho, The effect of through‐thickness compressive stress on mode II interlaminar fracture toughness, Compos. Struct. 182 (2017) 153–163.
[19] L. Camarda, G. Pitarresi, M. Lauria, F. Fazzari, M. D’Arienzo, Three single loops enhance the biomechanical behavior of the transtibial pull‐out technique for posterior meniscal root repair, Arch. Orthop. Trauma Surg. 137 (2017) 1301–1306.
[20] M. Di Filippo, S. Alessi, G. Pitarresi, M.A. Sabatino, A. Zucchelli, C. Dispenza, Hydrothermal aging of carbon reinforced epoxy laminates with nanofibrous mats as toughening interlayers, Polym. Degrad. Stab. 126 (2016) 188–195.
[21] T. Scalici, G. Pitarresi, G. Catalanotti, F.P. van der Meer, A. Valenza, The Transverse Crack Tension test revisited: An experimental and numerical study, Compos. Struct. 158 (2016) 144–159.
[22] L. Camarda, G. Pitarresi, F. Fazzari, D. Tumino, M. D’Arienzo, Biomechanical comparison between the modified rolling‐
hitch and the modified finger‐trap suture techniques, Arch. Orthop. Trauma Surg. 136 (2016) 1595‐1600.
[23] T. Scalici, G. Pitarresi, D. Badagliacco, V. Fiore, A. Valenza, Mechanical properties of basalt fiber reinforced composites manufactured with different vacuum assisted impregnation techniques, Compos. Part B Eng. 104 (2016) 35–43.
[24] A. Toscano, G. Pitarresi, M. Scafidi, M. Di Filippo, G. Spadaro, S. Alessi, Water diffusion and swelling stresses in highly crosslinked epoxy matrices, Polym. Degrad. Stab. 133 (2016) 255–263.
[25] G. Pitarresi, M. Scafidi, S. Alessi, M. Di Filippo, C. Billaud, G. Spadaro, Absorption kinetics and swelling stresses in hydrothermally aged epoxies investigated by photoelastic image analysis, Polym. Degrad. Stab. 111 (2015).
doi:10.1016/j.polymdegradstab.2014.10.019.
[26] S. Alessi, M. Di Filippo, C. Dispenza, M.L. Focarete, C. Gualandi, R. Palazzetti, G. Pitarresi, A. Zucchelli, Effects of Nylon 6,6 nanofibrous mats on thermal properties and delamination behavior of high performance CFRP laminates, Polym.
Compos. 36 (2015) 1303–1313.
[27] G. Pitarresi, Lock‐In Signal Post‐Processing Techniques in Infra‐Red Thermography for Materials Structural Evaluation, Exp. Mech. 55 (2015) 667–680.
[28] G. Pitarresi, D. Tumino, A. Mancuso, Thermo‐mechanical behaviour of flax‐fibre reinforced epoxy laminates for industrial applications, Materials (Basel). 8 (2015) 7371–7388. doi:10.3390/ma8115384.
[29] M. Scafidi, G. Pitarresi, A. Toscano, G. Petrucci, S. Alessi, A. Ajovalasit, Review of photoelastic image analysis applied to structural birefringent materials: glass and polymers, Opt. Eng. 54 (2015) 081206–081206.
[30] Ajovalasit A, Nigrelli V, Pitarresi G, Virzì Mariotti G. On the history of torsional stress concentrations in shafts: from electrical analogies to numerical methods. The Journal of Strain Analysis for Engineering Design. 2014;49(6):452‐466.
[31] Camarda L, Pitarresi G, Moscadini S, Marannano G, Sanfilippo A, D'Arienzo M. Effect of suturing the femoral portion of a four‐strand graft during an ACL reconstruction. Knee Surgery, Sports Traumatology, Arthroscopy. 2014;22(5):1040‐6.
[32] Tumino D, Ingrassia T, Nigrelli V, Pitarresi G, Urso Miano V. Mechanical behavior of a sandwich with corrugated GRP core: Numerical modeling and experimental validation. Frattura ed Integrita Strutturale. 2014;30:317‐26.
[33] Pitarresi G, Alessi S, Tumino D, Nowicki A, Spadaro G. Interlaminar fracture toughness behavior of electron‐beam cured carbon‐fiber reinforced epoxy‐resin composites. Polymer Composites. 2014;35(8):1529‐42.
[34] Alessi S, Pitarresi G, Spadaro G. Effect of hydrothermal ageing on the thermal and delamination fracture behaviour of CFRP composites. Composites Part B: Engineering. 2014;67:145‐53.
[35] Spadaro G, Alessi S, Dispenza C, Sabatino MA, Pitarresi G, Tumino D, Przbytniak G. Radiation curing of carbon fibre composites. Radiat Phys Chem. 2014;94(1):14‐7.
[36] Pitarresi G, Toscano A, Scafidi M, Di Filippo M, Alessi S, Spadaro G. Photoelastic stress analysis assisted evaluation of fracture toughness in hydrothermally aged epoxies. Frattura ed Integrita Strutturale. 2014;30:127‐37.
[37] Pitarresi G. Implementation of active infrared NDT techniques using long square heating pulses. SDHM Structural Durability and Health Monitoring. 2012;8(2):149‐75.
[38] Pitarresi G, Amorim J. Indentation of rigidly supported sandwich beams with foam cores exhibiting non‐linear compressive behaviour. Journal of Sandwich Structures and Materials. 2011;13(5):605‐36.
[39] Ajovalasit A, Pitarresi G. Strain measurement on composites: Effects due to strain gauge misalignment. Strain.
2011;47(SUPPL. 1):e84‐92.
[40] Alessi S, Conduruta D, Pitarresi G, Dispenza C, Spadaro G. Accelerated ageing due to moisture absorption of thermally cured epoxy resin/polyethersulphone blends. Thermal, mechanical and morphological behaviour. Polym Degrad Stab.
2011;96(4):642‐8.
[41] Pitarresi G, Galietti U. A quantitative analysis of the thermoelastic effect in CFRP composite materials. Strain.
2010;46(5):446‐59.
[42] Alessi S, Conduruta D, Pitarresi G, Dispenza C, Spadaro G., “Hydrothermal ageing of radiation cured epoxy resin‐polyether sulfone blends as matrices for structural composites”, Polymer Degradation and Stability 95 (2010) 677‐683.
[43] Pitarresi G., D’Acquisto L., Siddiolo A.M., “Thermoelastic Stress Analysis by means of an IR scanner and a 2D‐FFT based Lock‐In technique”, Journal of Strain analysis, vol 43 (2008), pp. 493‐506.
[44] G. Pitarresi, J.J. Carruthers, A.M. Robinson, G. Torre, J.M. Kenny, S. Ingleton, O. Velecela, M.S. Found, "A comparative evaluation of crashworthy composite sandwich structures”, Composite Structures, Vol. 78, 34‐44 (2007).
[45] A. Ajovalasit, G. Pitarresi, B. Zuccarello, “Limitation of carrier fringe methods in digital photoelasticity”, Optics and Lasers in Engineering, n. 45, pp. 631–636 (2007).
[46] Mangino, E., Carruthers, J. and Pitarresi, G. ‘The future use of structural composite materials in the automotive industry’, Int. J. Vehicle Design, Vol. 44, Nos. 3/4, pp.211–232 (2007).
[47] Pitarresi, G., Patterson, E. A., Found, M. S., "An investigation of the influence of macroscopic heterogeneity on the thermoelastic response of fibre reinforced plastics", Composites Science and Technology, Vol. 65‐2, p. 269‐280 (2005).
[48] Pitarresi, G., Patterson, E. A., "A review of the general theory of thermoelastic effect", Journal of Strain Analysis, Vol. 38, N.5, Settember 2003, pp. 405‐417.
[49] Barone, S., Pitarresi, G., "The development of a hybrid technique employing the boundary element method for thermoelastic stress separation", Strain, Journal of BSSM (British Society for Strain Measurement),Vol. 36 No. 4, 2000, pp.
187‐196.
9.3 CAPITOLI O CONTRIBUTI SU LIBRO
Date ()
[50] Pitarresi G, Tecniche basate sull’Effetto Termoelastico. Chapter contribution printed in: Ajovalasit A, Cerniglia D, Petrucci G, Pitarresi G (2018), Introduzione alla Meccanica Sperimentale dei Solidi. Aracne ed. (Italy), ISBN: 978–88–255–1152–9.
[51] Petrucci G, Pitarresi G, Tecniche a Correlazione Digitale di Immagini. Chapter contribution printed in: Ajovalasit A, Cerniglia D, Petrucci G, Pitarresi G (2018), Introduzione alla Meccanica Sperimentale dei Solidi. Aracne ed. (Italy), ISBN:
978–88–255–1152–9.
[52] Mancuso A, Pitarresi G, Saporito A, Tumino D. Topological optimization of a structural naval component manufactured in FDM. Lect Notes Mech Eng 2019:451–62. doi:10.1007/978‐3‐030‐12346‐8_44.
[53] Mancuso A, Pitarresi G, Trinca G B, Tumino D (2017), Refitting of an Eco‐Friendly sailing yacht: Numerical prediction and experimental validation. In: Eynard B., Nigrelli V., Oliveri S., Peris‐Fajarnes G., Rizzuti S. (eds) Advances on Mechanics, Design Engineering and Manufacturing. Lecture Notes in Mechanical Engineering. Springer, Cham, 527–36 (doi:
10.1007/978‐3‐319‐45781‐9_53).
[54] Ajovalasit A, Nigrelli V, Pitarresi G, Mariotti G V (2016), Determination of torsional stresses in shafts: From physical analogies to mathematical models, Hist. Mech. Mach. Sci. 31 (2016) 327–343. doi:10.1007/978‐3‐319‐22680‐4_19. In:
Sorge F., Genchi G. (eds) Essays on the History of Mechanical Engineering. History of Mechanism and Machine Science, vol 31. Springer.
[55] Alessi S, Dispenza C, Pitarresi G, Spadaro G (2011). Radiation Curing of Thermosetting‐ Thermoplastic Blends as Matrices for Structural Carbon Fibre Composites. In: Advances in Composite Materials ‐ Ecodesign and Analysis. vol. 2011‐03, p.
125‐140. Edited by Brahim Attaf, Publisher: InTech. ISBN: 978‐953‐307‐150‐3.
9.4 ARTICOLI SU PROCEEDINGS DI CONFERENZE INTERNAZIONALI
Di seguito si riportano in corsivo i contributi ove lo scrivente è stato anche relatore al convegno.
Nota su significato sigle apposte in calce ad ogni riferimento:
FP ‐ full paper, SA – short abstract (1 pagina) – LA long abstract (da 2 a 4 pagine); BPR – sottoposta a blind peer review.
Date ()
[56] Pitarresi G. Evaluation of lock‐in signal data processing procedures for Thermoelastic Stress Analysis. BSSM 14th International Conference on Advances in Experimental Mechanics 2019, 9th ‐11th September, 2019, Queen's University, Belfast (UK) ‐ LA+BPR
[57] Pitarresi G, Scalici T, Catalanotti G. Advances in the characterisation of static and fatigue Mode II delamination by means of the Transverse Cut Tension specimen. Composites 2019, 7th ECCOMAS Thematic Conference on The Mechanical Response of Composites, Girona (Spain), 18‐20 September 2019. (short abstract) ‐ SA
[58] Pitarresi G, Ricotta M, Meneghetti G. Investigation of the crack tip stress field in a stainless steel SENT specimen by means of thermoelastic stress analysis. 25th International Conference on Fracture and Structural Integrity, and in Procedia Struct. Integr., vol. 18, Elsevier B.V.; 2019, p. 330–46. doi:10.1016/j.prostr.2019.08.173. – FP
[59] Catalanotti G., Scalici T., Pitarresi G. & Van Der Meer F. P. (2017). The effect of the through‐the‐thickness compressive stress on mode II interlaminar fracture toughness. Paper presented at the ICCM International Conferences on Composite Materials, ICCM 2017; Xi'an; China; 20 August 2017 through 25 August 2017. ‐ SA
[60] D’Arienzo A, Camarda L, Morello S, Lauria M, Pitarresi G, D’Arienzo M. Three Single Loops for Transtibial Pull Out Suture Enhance the Biomechanical Behavior of Posterior Meniscal Root Repair, In Proceedings of the American Academy of Orthopaedic Surgeons 2018 Annual Meeting, AAOS 2018, 6‐10 Mar 2018, New Orleans, Louisiana (US). ‐ SA
[61] N. Montinaro, D. Cerniglia, G. Pitarresi, Flying laser spot thermography for the inspection of aerospace grade Fibre Metal Laminates, in: 4th IEEE Int. Work. Metrol. AeroSpace, Metroaerosp. 2017 ‐ Proc., 2017: pp. 206–210.
doi:10.1109/MetroAeroSpace.2017.7999565 – FP + BPR
[62] Alessi A., Toscano A, Pitarresi G, Dispenza C, Spadara G (2017). Water diffusion and swelling stresses in ionizing radiation cured epoxies as matrices for carbon fiber composites. In The 30th Miller Conference on Radiation Chemistry, October 7‐11, 2017. Castellammare del Golfo‐Italy ‐ SA
[63] Scalici T, Pitarresi G, Valenza A, Catalanotti G, Camanho P (2015). Experimental evaluation of through‐the‐thickness stress distribution in transverse crack tension test samples. In Proceedings of 20th International Conference on Composite Materials – ICCM 20. 19‐24 July 2015, Copenhagen (Denmark). ‐ SA
[64] A. Mancuso, G. Pitarresi, D. Tumino, Mechanical Behaviour of a Green Sandwich Made of Flax Reinforced Polymer Facings and Cork Core, XXIII Italian Group of Fracture Meeting, IGFXXIII, and in: Procedia Eng., 2015: pp. 144–153.
doi:10.1016/j.proeng.2015.06.225. ‐ FP
[65] S. Alessi, M. Di Filippo, G. Pitarresi, M. Scafidi, A. Toscano, Fracture Toughness of Hydrothermally Aged Epoxy Systems with Different Crosslink Density, XXIII Italian Group of Fracture Meeting, IGFXXIII, and in: Procedia Eng., 2015: pp. 507–
516. ‐ FP
[66] Ajovalasit A., Nigrelli V., Pitarresi G., & Virzì Mariotti G. Torsional stress concentrations in shafts: from electrical analogies to numerical methods. In IFToMM Workshop on History of Machine and Mechanism Science (2014). – FP
[67] Spadaro G, Sabatino MA, Grimaldi N, Alessi S, Pitarresi G, & Dispenza C (2013). Radiation processing: a versatile methodology to tune the structure of polymeric materials. In Nanoscience and nanotechnology, 2013. ‐ LA
[68] Pitarresi G. (2012). Implementation of a fast and low cost IR‐NDT technique by means of a Square Pulse Modulated Lock‐
In Thermography. QIRT 11 ‐ 11th International Conference on Quantitative InfraRed Thermography (2012). ‐ FP
[69] Spadaro G, Alessi S, Dispenza C, Sabatino MA, Pitarresi G, Przbytniak G. Radiation curing of carbon fibre composites. Paper presented at the Ionizing Radiation and Polymers symposiums (IRaP), Cracow (2012). ‐ SA
[70] Alessi S, Pitarresi G, Spadaro G, Tumino D. Mode I fracture toughness behavior of hydro‐thermally aged carbon fibre reinforced DGEBA‐HHPA‐PES systems. AIP conference proceedings, Volume 1459, Issue 1, 2012, Pages 117‐119. ‐ FP
[71] Pitarresi G, Tumino D, Alessi S, Nowicki A, Spadaro G. Mode I fracture toughness behaviour of epoxy resincarbon fiber composites cured by ionising radiation. ECCM 2012 ‐ Proceedings of the 15th european conference on composite materials, 2012. ‐ FP
[72] G. Alaimo, S. Alessi, D. Enea, G. Pitarresi, G. Przybytniak, G. Spadaro, D. Tumino "The Durability of Carbon Fiber/Epoxy Composites Under Hydrothermal Ageing", XII DBMC ‐ Porto, Portugal, 2011. ‐ FP
[73] G. Pitarresi. Thermal NDE of thick GRP panels by means of a Pulse Modulated Lock‐In Thermography technique. ICEM 14 – 14th International Conference on Experimental Mechanics ‐ EPJ Web of Conferences 6, 38014 (2010) – doi:
10.1051/epjconf/20100638014. ‐ FP
[74] J. Amorim & G. Pitarresi. Investigation on the indentation behavior of sandwich beams using crushable and hyperelastic foam cores. ICEM 14 – 14th International Conference on Experimental Mechanics, EPJ Web of Conferences 6, 24002 (2010) – doi: 10.1051/epjconf/20100624002. ‐ FP
[75] Pitarresi G., Normanno A. and D’Acquisto L. “Thermoelastic stress analysis of a 2D stress field using a single detector infrared scanner and lock‐in filtering”, Journal of Physics: Conference Series 181 (2009) 012075. – FP + BPR
[76] D'Acquisto L, Normanno A, Pitarresi G, Siddiolo AM. Thermoelastic signal processing using an FFT lock‐in based algorithm on extended sampled data. 19th IMEKO World Congress 2009. Volume 3, 2009, Pages 1942‐1947. – FP + BPR
[77] G. Pitarresi, A. Licari, A. Pasta, “Thermal NDT of glass reinforced composite panels for naval applications by means of a linear infrared scanner”, memoria estesa presentata al NAV 2009, 16th International Conference of Ship and Shipping Research, MESSINA, Italy 26 ‐ 27 November 2009. ‐ FP
[78] J. Amorim, G. Pitarresi and A. Tarantino “Investigation on the behaviour of fully thermoplastic composite sandwich beams under concentrated loads”, ETDCM9‐ 9th Seminar on Experimental Techniques and Design in Composite Materials 30 Sep‐
2 Oct 2009 Vicenza (Italy). ‐ LA
[79] S. Alessi, C. Dispenza, D. Conduruta, G. Pitarresi, G. Spadaro, “Epoxy resin‐thermoplastic blends as polymer matrices for carbon fiber composites”, Polymerfest, 40 years of “polymer research” at the University of Palermo, International Meeting, Palermo, August 30‐Settember 2, 2009 (paper ID: PA19). ‐ SA
[80] Alessi, S., Dispenza, C., Conduruta, D.G., Pitarresi, G., & Spadaro, “Epoxy Resin‐Thermoplastic Blends Cured by Ionising Radiation. Structure/Properties Relationships”, proceedings of the 17th International Conference on Composite Materials, ICCM 17, 27‐31 July 2009 Edinburgh, UK (paper ID: D10:7). ‐ FP
[81] G. Pitarresi and U. Galietti “A quantitative investigation on the thermoelastic effect of cfrp laminates”, proceedings of the 17th International Conference on Composite Materials, ICCM 17, 27‐31 July 2009 Edinburgh, UK (paper ID: F14:15). ‐ FP
[82] Conduruta D, Alessi S, Pitarresi G., Dispenza C, Lavalle M, Corda U, Spadaro G. (2008), “Idrothermal aging of ionizing radiation cured epoxy matrices for carbon fiber composites”, in: AIP Conference Proceedings. IV International Conference Times Of Polymers (Top) And Composites. Ischia (IT). 21‐24 Settembre 2008, Vol. 1042, pp. 288‐290, ISBN/ISSN: 978‐0‐
7354‐0570‐7. doi:10.1063/1.2989036. ‐ LA
[83] D. Gh. Conduruta, S. Alessi, G. Pitarresi, M. Lavalle, C. Dispensa, G. Spadaro, “Thermal and mechanical properties of polymer matrices for carbon fibre composites produced by radiation curing of epoxy‐pes blends”, 13th European Conference on Composite materials, ECCM 13, Stockholm (Sweden), June 2‐5 (2008). Lavoro presentato nella Poster Session ed inserito negli atti della conferenza in CD‐ROM. ‐ FP
[84] S. Alessi, D. Conduruta, G. Pitarresi, C. Dispenza, M. Lavalle, U. Corda, G. Spadaro, “Properties of ionizing radiation cured epoxy based polymer matrices for carbon fiber composites after ageing due to moisture absorption and thermal treatment”, SAMPE Europe 29th International Conference – SEICO 2008, Parigi 31 Marzo – 2 Aprile 2008. Memoria inserita negli atti della conferenza pubblicati in CD‐ROM. ‐ LA
[85] Alessi S., Dispenza C., Fuochi P., Lavalle M., Corda U., Conduruta D.G., Pitarresi G., Spadaro G., “Properties‐morpholohy‐
processing relationships in the e‐beam curing of epoxy resin‐thermoplastic blends for advanced composite matrices”, Polymer Blends ‐ 9th European Symposium. Palermo. 9‐12 settembre 2007, Articolo esteso pubblicato su cd‐rom:
ISBN/ISSN: 978‐88‐95272‐19‐1 (ID file 162), (2007). ‐ FP
[86] G. Pitarresi, L. D’Acquisto, F. Lo Nigro and A.M. Siddiolo, “Thermoelastic stress analysis by means of a standard thermocamera and a 2d‐fft based lock‐in technique”, ICEM13 ‐ 13th International Conference on Experimental Mechanics, Alexandroupolis, Greece, July 1‐6, 2007. ‐ FP
[87] Ajovalasit A., Pitarresi G., Zuccarello B., “Elaborazione delle immagini con il metodo della trasformata di Fourier: il caso della fotoelasticità”. International joined Conference XVI ADM ‐ XIX INGEGRAF. Perugia. 6‐8 giugno 2007. Articolo presente sugli atti in cd‐rom: ISBN/ISSN: 978‐884671832‐7 (ID file 193), (2007). ‐ FP
[88] G. Spadaro, S. Alessi, C. Dispenza, G. Pitarresi, “Ionizing radiation curing of epoxy based blends in order to produce high performance composites”, extended abstract and presentation at the 17th Annual International Conference on Manufacturing and Design of Composites, SICOMP AB, 12‐13 June 2006, Piteå (Sweden). ‐ SA
[89] G. Pitarresi, “Thermoelastic Effect based Stress Analysis applications to Fibre Reinforced Plastic composites”, extended abstract and presentation at the 17th Annual International Conference on Manufacturing and Design of Composites, SICOMP AB, 12‐13 June 2006, Piteå (Sweden). ‐ SA
[90] Pitarresi G, Conti A, Galietti U. Investigation on the influence of the surface resin rich layer on the thermoelastic signal from different composite laminate lay‐ups. 4th International Conference on Advances in Experimental Mechanics;
Southampton, and in Applied Mechanics and Materials, Volume 3‐4, 2005, pages 167‐172 (editore: Trans‐Tech Publishing, ISBN/ISSN 0‐87849‐987‐3). – FP + BBR
[91] Pitarresi, G., Conti, A. and Galietti, U., "Investigations on some analytical stress and strain‐based relations of the thermoelastic effect on FRP composite materials”, International Seminar on Design & Performance of Composite Materials Conference, including ETDCM‐7, 03‐06 April 2005, Sheffield (UK). ‐ LA
[92] Pitarresi, G., Carruthers, J.J., Bridge, I., "Determination of the flexural properties of sandwich beams with multi‐cellular reinforced cores”, Proceedings of ICEM12 – 12th International Conference on Experimental Mechanics, 29 August/2 Settember 2004 (ISBN: 88 386 6273‐8), Politecnico di Bari, Italy. ‐ LA
[93] G. Pitarresi, J. Carruthers, L. Torre, O. Valecela, M. Found and M. Robinson, "A comparative evaluation of crashworthy composite sandwich structures”, proceedings of the Sixth International Seminar on Experimental Techniques And Design In Composite Materials (ETDCM6), Vicenza (IT) 18‐20 June 2003. ‐ LA
[94] J.J. Carruthers and G. Pitarresi, “The future use of Composites In Transport”, in Proceedings of the 24th International SAMPE Europe Conference of the Society for the Advancement of Materials and Process Engineering, Paris Expo, April 1st
‐3rd, 2003. ‐ LA
[95] Pitarresi, G., Patterson, E. A., "Characterisation of textile composite laminates by means of Thermoelastic Stress Analysis", Proceedings of TC15 Youth IMEKO Symposium on Experimental Mechanics, Forlì (IT), 2002. ‐ LA
9.5 ARTICOLI SU ATTI E PROCEEDINGS DI CONFERENZE NAZIONALI
Di seguito si riportano in corsivo i contributi ove lo scrivente è stato anche relatore al convegno.
Nota su significato sigle apposte in calce ad ogni riferimento:
FP ‐ full paper, SA – short abstract (1 pagina) – LA long abstract (da 2 a 4 pagine); BPR – sottoposta a blind peer review.
Date ()
[96] Cappello R., Catalanotti G., Pitarresi G. Crack detections in fatigue loaded structures by means of low‐cost Thermoelastic Stress Analysis setups. AIAS 2020 virtual conference, 2‐4 September 2020 (work ID. 1296). Under publication on IOP Conference Series: Materials Science and Engineering. – FP
[97] Pitarresi G., Cappello R., Li Calsi G., Catalanotti G. Influence of data input in the evaluation of Stress Intensity Factors from Thermoelastic Stress Analysis. AIAS 2020 virtual conference, 2‐4 September 2020 (work ID. 1327). Under publication on IOP Conference Series: Materials Science and Engineering. – FP
[98] Montinaro N., Cerniglia D., Pitarresi G. Laser thermography NDT for the inspection of debonding in titanium based fibre metal laminates. AIAS 2020 virtual conference, 2‐4 September 2020 (work ID. 1421). Under publication on IOP
Conference Series: Materials Science and Engineering. – FP
[99] Di Leonardo S, Burriesci G, Pitarresi G. Evaluation of the mechanical behaviour of NiTi shape memory alloy sheets by
[99] Di Leonardo S, Burriesci G, Pitarresi G. Evaluation of the mechanical behaviour of NiTi shape memory alloy sheets by